|
Welcome, Guest
|
TOPIC: Can I make a double bladed saber with these parts?
Can I make a double bladed saber with these parts? 2 months 1 week ago #84631
|
I'm curious if I can use the following parts to make a double bladed saber, without any issues or missing parts. I've never built a saber so I'd appreciate if anyone could point out obviously flaws or errors.
I'll update this every time someone gives a correction or information 2 ASP . Blade 26'' . null 2 Plug and Play LED 2 08 Emitters 2 Thin Neck Adapter 03 2 Dissident Switch 2 Dissident Body 1 Male-Male Coupler 1 1 Plug-and-Play Stunt Warrior and 1 Latching Plug-and-Play Switch (For side with no sound) 1 Plug and Play Veteran SaberCore 2.5 USA and 1 Momentary Plug-and-Play Switch (For side with sound) |
Can I make a double bladed saber with these parts? 2 months 1 week ago #84636
|
Hi Xoulious,
Even though I dont do diy electronics (you may need an experts advice) I believe you need a switch, battery pack(champion or higher because you seem to want sound) ,and possibly a kill key -Bdurist |
|
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84637
|
You’ve got to be 9.5 feet tall to want to use dual 37 inch blades...lol. Go on saberforges saberparts builder site and put it all together and see how long it is.
98% of saberstaff builders/ wielders use 26 inch blades. I normally use a 32” blade, but when I use a staff, I use two 26” blades, which are a tad too long for me (I’m 5’11”), but I’m used to it now. Shane “Hokey religions and ancient weapons are no match to a good blaster at your side, kid” “She may not look like much, but she’s got it where it counts” |
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84638
|
Not to mention the Avenger switch isn't available through ASP right now/anymore.
|
|
"Hold on to 16 as long as you can, changes come around real soon make us women and men." - John Mellencamp
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84641
|
The Viridian/Crimson sound is the ASP Plug-and-Play Veteran 2.5 USA Kit Here
You will also need a momentary switch lighted Here or unlighted Here I believe the recharge port and kill key are included with the sound kit You will need 2 of each of the above to have both sides lit, or you can get a Stunt Warrior kit Here plus a latching switch Here for one side |
|
There is no Light, There is no Dark, There is only the Force!
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84643
|
Ok, so on saberparts, the staff itself is 2’6.9”long... and a whopping 8’8.9” with two 37” blades.
Shane “Hokey religions and ancient weapons are no match to a good blaster at your side, kid” “She may not look like much, but she’s got it where it counts” |
|
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84651
|
I'll lower the blade size, thanks a lot for the heads up!
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84654
|
Ok so my (hopefully) improved version of the parts list
2 ASP . Blade 26'' . null 2 ASP . Led 12W+ . White 2 ASP . Emitter 8B . Standard 2 Dissident Switch 2 ASP . Dissident Body . Standard . Black Reptile 1 ASP . Male 1 . Standard (Coupler) 1 Plug-and-Play Stunt Warrior and 1 Latching Plug-and-Play Switch (For side with no sound) 1 Plug and Play Veteran SaberCore 2.5 USA and 1 Momentary Plug-and-Play Switch (For side with sound) If there's anymore errors or mistakes, I'll appreciate any help. |
Can I make a double bladed saber with these parts? 2 months 1 week ago #84659
|
Xoulious wrote:
If there's anymore errors or mistakes, I'll appreciate any help.
Hi Xoulious, Something that others have forgotten to mention is that ASP Emitter 8, found HERE, requires a "Thin Neck Adaptor" which you can find HERE (Thin Neck Adaptor). Currently at 7am GMT, the SF site is showing both parts as being on Pre-Order unfortunately. Good luck with the build I hope it comes together. For Tyeth |
|
The following user(s) said Thank You: Lord Metallica, Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84660
|
For Tyeth wrote:
Xoulious wrote:
If there's anymore errors or mistakes, I'll appreciate any help.
Hi Xoulious, Something that others have forgotten to mention is that ASP Emitter 8, found HERE, requires a "Thin Neck Adaptor" which you can find HERE (Thin Neck Adaptor). Currently at 7am GMT, the SF site is showing both parts as being on Pre-Order unfortunately. Good luck with the build I hope it comes together. For Tyeth Thanks! I replaced "2 ASP . Emitter 8B . Standard" with "2 08 Emitter, 2 Thin Neck Adapter 03" |
|
The following user(s) said Thank You: For Tyeth
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84661
|
When putting things in your shopping cart you should be careful to buy the Plug and Play LEDs, which come reasily built with everything you need on them and micro dean connectors
|
|
Definition: 'Love' is making a shot to the knees of a target 120 kilometres away using an aratech sniper rifle with a tri-light scope.
The following user(s) said Thank You: Xoulious
|
Can I make a double bladed saber with these parts? 2 months 1 week ago #84662
|
Ser Arcturis wrote:
When putting things in your shopping cart you should be careful to buy the Plug and Play LEDs, which come reasily built with everything you need on them and micro dean connectors
Changed "2 ASP . Led 12W+ . White" to "Plug and Play LED". Thanks. |
Can I make a double bladed saber with these parts? 2 months 1 week ago #84666
|
yes buy all from ASP line
that way everything connects easily with no probs. |
|
There is no Light, There is no Dark, There is only the Force!
|