Welcome, Guest
Username: Password: Remember me

TOPIC: Avenger/Templar pommel disassembled

Avenger/Templar pommel disassembled 2 months 3 weeks ago #71898

  • Samhain138
  • Samhain138's Avatar
  • Offline
  • Junior Member
  • Posts: 26
  • Thank you received: 28
I heard the cog comes out of the pommel. I can't really get it to budge, and I don't want to try and force it if it's not supposed to come off. How's it supposed to come apart?

Also worth mentioning it's off of my Templar.
Last Edit: 2 months 3 weeks ago by Samhain138.
The administrator has disabled public write access.

Avenger/Templar pommel disassembled 2 months 3 weeks ago #71906

  • OvrcAHst
  • OvrcAHst's Avatar
  • Offline
  • Moderator
  • War. Mostly Dark, Often Grey, Sometimes Light
  • Posts: 2573
  • Thank you received: 1552
Samhain138 wrote:
How's it supposed to come apart?


Lefty loosey, righty tighty. ;)
Also worth mentioning it's off of my Templar.
Unless there's been a change with what's used with inventory and how the piece is manufactured, Avenger Pommel's on Avenger/Templar as a prebuild I haven't successfully budged either (although, haven't really tried applied heat). Pictured above is ASP Avenger Pommel that was received as a replacement.
The administrator has disabled public write access.

Avenger/Templar pommel disassembled 2 months 2 weeks ago #72176

  • Samhain138
  • Samhain138's Avatar
  • Offline
  • Junior Member
  • Posts: 26
  • Thank you received: 28
So if I ordered an ASP pommel will it work on my Templar? The item page says it's not ASP compatible. I'm hoping that's not including the pommel.
The administrator has disabled public write access.

Avenger/Templar pommel disassembled 2 months 2 weeks ago #72256

  • Darth Squidious
  • Darth Squidious's Avatar
  • Offline
  • Senior Member
  • Vanquish black: Red, ASP Juggernaut pike "Dreadnaught": Red, Bastion NBv2: ArcBlue, Templar Custom "Runesaber": ArcBlue, Crystal Reveal Bane "Heart of Darkness": Deep Red, Prodigal Son: Green
  • Posts: 56
  • Thank you received: 17
You can get an ASP pommel and it will fit on the Templar. I did a custom Templar a few months ago and I can confirm that the threads on the body are compatible. The only thing about the Templar is that the emitter(s) and the switch section are one piece. Other than that the Templar will accept ASP bodies and pommels.
What's the internal temperature of the average Taun Taun?

Lukewarm...
The administrator has disabled public write access.

Member Login

Latest Posts

    • Themed Sabers (781 Posts)
    • Hello Everybody, Well over the past two pages of this thread I have posted 26 designs (at one point...
    • What Blade Length Should ... (8 Posts)
    • I currently have a consular staff with long coupler and i use the shortest blades saberforge sells....
    • RBGA vs Specific color (7 Posts)
    • Yup! That's the website for the board manufacturer. Specifically, you want the one for Spark...
    • RBGA vs Specific color (7 Posts)
    • Yes, that is due to move you have to do to change color. Thanks KelbornX, I didn't know how to...
    • How to change a no-quick ... (3 Posts)
    • Also worth mentioning that quick connects are not compatible with Hero tier sabers. At least from...

More Topics »

Forum Statistics

  • Total Users: 4945
  • Latest Member: Yeaflore
  • Total Posts: 54.8k
  • Total Topics: 4499
  • Total Sections: 22
  • Total Categories: 119
  • Today Open: 2
  • Yesterday Open: 5
  • Today Answer: 10
  • Yesterday Answer: 23