Welcome, Guest
Username: Password: Remember me
Threaded Indented

TOPIC: Pre-Order Question

Pre-Order Question 10 months 4 days ago #72680

  • Meatsweats
  • Meatsweats's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Thank you received: 3
Hi All.

New to the forum. I'm looking to buy an Initiate Juggernaut for a DIY build. Not really clear on how Pre-Orders work. It says it takes up to 6 weeks for processing and shipment. Is that up to 6 weeks once I order or up to 6 weeks once it is available? If so, how long could I be waiting once I place the order? I tried looking on the forums but didn't really see an answer. Thanks a lot!
The administrator has disabled public write access.

Pre-Order Question 10 months 4 days ago #72684

  • Lord270
  • Lord270's Avatar
  • Offline
  • Senior Member
  • Posts: 53
  • Thank you received: 14
Welcome Scheepey I believe that means it will be about 6 weeks to build and ship it once it becomes available depending on what kind of finish and extras you have done to it when you order it (e.g.: weathered or acid finish or grip wrap added)

As to the question of how long it might be before it's available only the forge will know. It is indeterminable
Last Edit: 10 months 4 days ago by Lord270.
The administrator has disabled public write access.

Pre-Order Question 10 months 4 days ago #72690

  • Meatsweats
  • Meatsweats's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Thank you received: 3
OK, thanks for the reply!
The administrator has disabled public write access.

Pre-Order Question 10 months 3 days ago #72725

  • Meatsweats
  • Meatsweats's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Thank you received: 3
Made my first SF purchase. This will be my second build. Doing a Darth Ryo chassis w/ Spark 2.

Decided to do an ASP Juggernaut Build:

Juggernaut Emitter- Standard
Reliant Switch Section- Silver (planning on spray painting the middle part/switch box black)
Dissident Body- black no wrap
Juggernaut Pommel-silver
12w+ LED: 2R + 2Pr

So excited, will post once complete, probably will take a while.
The administrator has disabled public write access.

Pre-Order Question 10 months 2 days ago #72765

  • SadiraOrphesu
  • SadiraOrphesu's Avatar
  • Offline
  • Elite Member
  • Posts: 199
  • Thank you received: 94
Good luck on your build. Just a heads up (Someone more experienced would have to confirm this so I could be wrong) but I think that saberforge LEDs have issues working with other sound boards.
The administrator has disabled public write access.

Pre-Order Question 10 months 2 days ago #72766

  • Jas-Ot
  • Jas-Ot's Avatar
  • Offline
  • Platinum Member
  • Posts: 1046
  • Thank you received: 322
The LED will work fine on the Spark2. If it's wired for single channel there just wont be any alternate color for FOC, or blade effects. But the Spark2 will drive the LED just fine.

Not sure if you ordered the LED as a prebuild or not. If you ordered a custom X4 star to wire yourself, I would suggest wiring the two Reds to one channel, and the two Photo Reds to the second channel. You would be able to get a little more variety with the blade effects that way.

For instance you could allow one channel to dim for FOC effects or blade shimmers.
The administrator has disabled public write access.
The following user(s) said Thank You: SadiraOrphesu

Pre-Order Question 10 months 2 days ago #72767

  • SadiraOrphesu
  • SadiraOrphesu's Avatar
  • Offline
  • Elite Member
  • Posts: 199
  • Thank you received: 94
Thanks for the clarification Jas
The administrator has disabled public write access.

Pre-Order Question 10 months 2 days ago #72774

  • Meatsweats
  • Meatsweats's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Thank you received: 3
Yeah, that's how I was planning on doing it. I got the unwired X4. The main blade will be Medium Red with some sort of mix for FOC effects. Thanks for the reply! I've been stalking the forum for a couple months and your posts have helped a lot.
The administrator has disabled public write access.

Pre-Order Question 10 months 2 days ago #72775

  • Jas-Ot
  • Jas-Ot's Avatar
  • Offline
  • Platinum Member
  • Posts: 1046
  • Thank you received: 322
Also, Don't forget your resistors for those. You'll want 4 x 1ohm 2watt resistors.
The administrator has disabled public write access.

Pre-Order Question 10 months 1 day ago #72788

  • Meatsweats
  • Meatsweats's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Thank you received: 3
Yep, thanks for the tip!
The administrator has disabled public write access.
Threaded Indented

Member Login

Latest Posts

    • Double Reveal MPP Coming ... (112 Posts)
    • Is it still possible to buy one afterwards? Right now funds are low because of Christmas, but a the...
    • Sabercore 3.0 Swing Issue... (7 Posts)
    • Yep! Put them both on 0 and the problem still persists. Edit: I even tried deleting all the spin...
    • Sabercore 3.0 Swing Issue... (7 Posts)
    • So, you said in your video that you adjusted the motion sensitivity. Did you adjust your spin...
    • Sabercore 3.0 Swing Issue... (7 Posts)
    • Thank you very much, Brax. I'm hoping I don't have to send this saber off again... I'm praying its...
    • Sabercore 3.0 Swing Issue... (7 Posts)
    • I don't think it is a design flaw, but I will see what I can find out about it.

More Topics »

Forum Statistics

  • Total Users: 6244
  • Latest Member: Hulnickoluslo
  • Total Posts: 62.7k
  • Total Topics: 5270
  • Total Sections: 24
  • Total Categories: 136
  • Today Open: 5
  • Yesterday Open: 3
  • Today Answer: 35
  • Yesterday Answer: 27