TOPIC: Korbanth MPP- All too easy.(finished)

Korbanth MPP- All too easy.(finished) 2 months 3 weeks ago #74382

Vechaljian Offline Elite Member Posts: 273 Thank you received: 129	I have a 2.1mm cable end I use to check which one Is which, I'm in habit of always using a ohm Meter before using a port, I find alot of bad ones this way. I want to say off the top of my head the bottom is the spring which goes to battery negative, so side would be board. I'll double check this afternoon when I get home from work
	The administrator has disabled public write access. The following user(s) said Thank You: MrBond

Korbanth MPP- All too easy.(finished) 2 months 2 weeks ago #74413

Vechaljian
Offline
Elite Member
Posts: 273
Thank you received: 129

I confirmed these recharge ports are... Back= Battery + , Bottom= Battery - , Side= Soundboard -
Also on my second Mpp I did as a commission, I took your suggestion and epoxied the port to the bubble card, I then glued another on the other side, but with the with port facing back to the other port, it gives it a nice metal line when looking at it from the front, I liked so I had to redo mine this way.

Last Edit: 2 months 2 weeks ago by Vechaljian.

The administrator has disabled public write access.

The following user(s) said Thank You: MrBond

Korbanth MPP- All too easy.(finished) 2 months 2 weeks ago #74430

MrBond Offline Senior Member Posts: 63 Thank you received: 15	Thanks for the checkup, really appreciated! I see we use the same killkeys also, great minds think alike I guess!
	The administrator has disabled public write access.

Korbanth MPP- All too easy.(finished) 2 months 1 week ago #74648

MrBond Offline Senior Member Posts: 63 Thank you received: 15	Made this for future reference in case anybody uses them in their builds.
	The administrator has disabled public write access.

Korbanth MPP- All too easy.(finished) 2 months 1 week ago #74655

BoostinIX Offline Platinum Member Posts: 521 Thank you received: 179	That's pretty clever, I like it!
	The administrator has disabled public write access.

Korbanth MPP- All too easy.(finished) 2 months 5 days ago #74820

MrBond Offline Senior Member Posts: 63 Thank you received: 15	Finally done, it worked out great! Only thing that wasn't up to my satisfaction was that even E6000 glue makes visible bubbles thru the card, but no biggie. I flipped the second non-working recharge port so it could be used as a placeholder for the kill-key.
	The administrator has disabled public write access.

Korbanth MPP- All too easy.(finished) 2 months 5 days ago #74821

MrBond Offline Senior Member Posts: 63 Thank you received: 15	So here it is, Spark 2 with Lord Blako's Rogue One font, modified MHS chassis with Railmaster 28mm speaker, tri-XP-E2 Cree R/R/W. I intended to put all the ESB wires for accuracy but I love the light sipping thru the sides so it's gonna stay as is. Thanks for your help Vechaljian!
	Last Edit: 2 months 5 days ago by MrBond. The administrator has disabled public write access. The following user(s) said Thank You: Vechaljian

Korbanth MPP- All too easy.(finished) 2 months 5 days ago #74822

Vechaljian Offline Elite Member Posts: 273 Thank you received: 129	Looks Good, I like the kill key place holder Idea, But I already used Epoxy on mine, so that would be that lol
	Last Edit: 2 months 4 days ago by Vechaljian. The administrator has disabled public write access.

Forum

Galleries

Other Sabers Gallery

Korbanth MPP- All too easy.(finished)