|
Welcome, Guest
|
|
TOPIC: Help please
Help please 1 year 10 months ago #35742
|
I bought a custom saber from a pawn shop that didn't even know how or what kind it was got a discount and was hoping to fix. It took it apart looked online and found a kill plug as some call it and it has a big battery and sd card and has two small button's that say stuff and quotes and change color and make blaster and ship sounds it says essence episode one ,then two and so on but don't know how to put on the blade, I think is an older model because it not on sale anywhere help
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #35745
|
Huh. well Tony it would seem that you have a saber with high-end electronics possibly with a Spark color 2 board the same type that come with saberforge hero tier sabers hard to tell the make of the Sabre pictures are a little small and I am not familiar with that saber if you paid under $300 you may have a good deal there. As far as putting in the blade there should be a small set screw about an inch below the emitter loosen it then remove the blade plug then insert the blade and tighten the retention screw.
|
Help please 1 year 10 months ago #36457
|
They wanted 100 for it got it for 80$, has a light stand and charger
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36464
|
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36471
|
Is the black screw in the middle of that silver circle the one you were talking about its solid stuck and had to take out
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36626
|
I can't ID it, but I want to say that's a heavily customized saber you have there. Very unique. The stand appears to be an older Master Replicas stand, but it could have been purchased separately. The sound board supports RGB and multiple fonts, giving a minimum 80 dollar value for that alone. Great bargain!
I want to help out a bit further (find the retention screw, maybe ID the blade/manufacturer) but the current photos are a bit difficult to see. Can you provide a few more? Specifically: -The full saber hilt from both sides, in white light -The saber emitter end, both sides, maybe a few angles, white light -The saber switch section |
Help please 1 year 10 months ago #36639
|
The emitter appears to be this one from TCSS: http://www.thecustomsabershop.com/MHSV1-Blade-Holder-Style-25-P809.aspx
|
|
No matter what happens now, you shouldn't be afraid. Because I know today has been the most perfect day I've ever seen.
|
Help please 1 year 10 months ago #36652
|
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36656
|
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36660
|
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36677
|
That's a pretty cool custom saber. Looks a bit unwieldy, though.
|
 Emerald Knight, Chosen, Dark Paladin, Sentinel
The following user(s) said Thank You: TonyRamirezJr.1986
|
Help please 1 year 10 months ago #36698
|
Ay Tony,
Have you tried turning this silver thumbscrew here? If that doesn't work, is something poking out in front of the blade cover? Circled for reference: |
|
The following user(s) said Thank You: TonyRamirezJr.1986
|
Help please 1 year 10 months ago #36700
|
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36709
|
Yes something is in there and light doesn't come through it
|
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36949
|
Thanks had pull that out and mess with the wiring and light came on and the screws in the blade end where wicking out and the silver screw was the right one
Not sure what it is thanks jedi masters |
|
There is no death , there is only the force
|
Help please 1 year 10 months ago #36964
|
Hi Tony,
That piece you have removed looks like the "Blade Plug" used to protect the LED bulb when you don't have the blade inserted. When you have the Saber hanging on your belt you put this plug in. Sometimes the plug has slots or holes to allow a small amount of light through without blinding you when you look at it. You may be able to insert the blade now (but don't tighten any screws yet until you know everything fits properly!) and switch the saber on to see if the blade lights up. I will be honest I haven't seen many Sabers like this and have searched the Net all day trying to find Info about it. Kind regards, For Tyeth |
|
The following user(s) said Thank You: TonyRamirezJr.1986
|
Help please 1 year 10 months ago #37035
|
It's a very ugly blade plug , and everything works great except it's not very bright in day light but need a belt clip and plug any have spares or knows a guy
|
|
There is no death , there is only the force
The following user(s) said Thank You: For Tyeth
|
Help please 1 year 10 months ago #37056
|
That looks pretty sweet for a pawn shop find! Congrats on getting it working.
|
|
The following user(s) said Thank You: TonyRamirezJr.1986
|
Help please 1 year 10 months ago #37065
|
Hi Tony,
Well done indeed on finding what could be quite a gem! It looks as if it may have been built by an individual using modular parts. Glad it's working! For Tyeth MTFBWY! |
|
|
The following user(s) said Thank You: TonyRamirezJr.1986
|
Help please 1 year 10 months ago #37517
|
Looks like it's been constructed from different sources like saver Forge and custom sabers .com and so forth and the it's really expensive if you calculate all the idividual pics that was bought to make this hidden gem, so glad it has a charger and a stand blade and everything I was looking for in a custom saber, my favorite mode on it is the rainstorm mode the blade is violet and the crystal is blue and you hear rain and thunder in the background and rain doping on the saber and the sound of it instantly evaporating and the blade flickering and humming it's so great
|
|
There is no death , there is only the force
|
|