Welcome, Guest

Forum

Saber DIY

Saber Electronics DIY

What wiring tutorial would you like to see most:

TOPIC: What wiring tutorial would you like to see most:

What wiring tutorial would you like to see most: 4 months 1 week ago #72759

Jas-Ot
Offline
Platinum Member
Posts: 954
Thank you received: 268

I already did a short tutorial for wiring prep and Cram-Fu for the Spark2 board. Which ones would you like to see next? I'm specifically looking at boards that would be common installs for a SF hilt or that fit the easiest. Specifically I'm thinking of the following boards:

Pico Cumble
Nano Biscotte
Sabercore 2.0
Spark2/Spark Color2

Boards like the Prizm, Crystal Focus, Igniter2 are less common and more often then not go into "higher end" hilts, but could also be a consideration.

Poll isn't working so just add your comments below and I will tally them up.

0 - Pico Crumble

2 - Igniter/Spark Color2 - full wiring

5 - Sabercore 2.0

5 - NBv3

Last Edit: 4 months 6 days ago by Jas-Ot.

The administrator has disabled public write access.

What wiring tutorial would you like to see most: 4 months 1 week ago #72768

Jas-Ot Offline Platinum Member Posts: 954 Thank you received: 268	In hind site, I'm trying to remember if Polls work on the forum.... If not, Then just add your thoughts as a comment below.
	The administrator has disabled public write access.

What wiring tutorial would you like to see most: 4 months 1 week ago #72769

Heliolord Offline Senior Member Posts: 60 Thank you received: 13	Well they don't seem to work for me, but I'm on my phone so that may be the reason. Of those, probably a NBv3. Or igniter, as I'd eventually like to upgrade my main Saber from the spark color 2 in my hero kit to an igniter board with a crystal chamber.
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72770

SadiraOrphesu Offline Elite Member Posts: 171 Thank you received: 73	I'd love confirmation on what I think is the right way to wire the sabercore 2.0 soundboard. Yeah I couldnt get the poll thing to work.
	Last Edit: 4 months 1 week ago by SadiraOrphesu. The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72771

Vechaljian Offline Elite Member Posts: 275 Thank you received: 129	I think by far the most easy, reliable and sturdy card, with the most options for a 1st time installer. the NBv3 would be a excellent tutorial.
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72780

DK44 Offline Elite Member Posts: 294 Thank you received: 137	NBv3
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72842

Jas-Ot Offline Platinum Member Posts: 954 Thank you received: 268	So, NBv3 is in the lead so far with 3 votes, and only two other votes cast.
	The administrator has disabled public write access.

What wiring tutorial would you like to see most: 4 months 1 week ago #72845

Borommakot Offline Platinum Member May the force be with us. Posts: 1435 Thank you received: 560	I think the most useful to the web at large would be a tutorial on sabercore. I feel like i'm regularly tripping over NBv3 guides, and while the Igniter/Spark Color guides might be less common, Sabercore guides are rarer still.
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72860

ZeRisinger Offline New Member Posts: 5 Thank you received: 1	I also agree with NBv3, it's the one I here the most about and would like to learn
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72865

SadiraOrphesu Offline Elite Member Posts: 171 Thank you received: 73	I have to agree with Borommakot, if you search NBV3 on Google you get multiple wiring videos and plenty of documentation. The only thing to find on Sabercore are some diagrams of questionable accuracy from this forum.
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 1 week ago #72898

Greysider Offline Platinum Member "I am not your kind. I do not feed off vengeance. I am a Jedi." - Quinlan Vos Posts: 721 Thank you received: 298	NBv3
	MAY THE FORCE BE WITH YOU The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 6 days ago #72928

Jas-Ot Offline Platinum Member Posts: 954 Thank you received: 268	Ok, so NBv3 in the lead with Sabercore board behind it. To be clear, I wil do tutorials around installing in a SF hilt. Offering some tips and tricks for Cram-Fu and the like. I agree though, there's tons of generic NB tutorials out there.
	The administrator has disabled public write access.

What wiring tutorial would you like to see most: 4 months 6 days ago #72929

Lord270 Offline Senior Member Posts: 53 Thank you received: 13	I am going to vote for the sabercore soundboard. This is the board I will most likely use when I attempt at doing my own build after this current one I'm doing with the PNP kit.
	The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 6 days ago #72932

KelbornX Offline Platinum Member Peace is a lie... Posts: 463 Thank you received: 220	I'll cast my vote for the Spark Color 2. I know it's not an option in the poll, but it's the board now used in the Hero sabers and I think it'd be good to have an install of that shown specifically on SF hilts.
	Aeon, Arbiter, Bastion, Consular, Gladius, Phoenix, Resilient (staff), Vanquish, Vengeance, Xiphos (2) ASP Dark Crusader, ASP Claíomh Solais The administrator has disabled public write access. The following user(s) said Thank You: Jas-Ot

What wiring tutorial would you like to see most: 4 months 6 days ago #72933

Jas-Ot
Offline
Platinum Member
Posts: 954
Thank you received: 268

The igniter/Spark boards share the same form factor so wiring all three of them is basically the same, except the Spark2 only does two LED channels and can support a single switch. Otherwise pretty much identical until you get into non standard stuff.

I don't have any igniter/spark builds in the queue right now, and personal build wise the only one I have on deck is going into a non SF hilt. So, i'll be waiting till someone requests a build using one. Either that or maybe one of the other guys could work one up if they have a build in the works for reference.

That being said, I do have my short wiring tutorial for the Spark2 which again, the Spark Color2 would basically be the same on. That tutorial just covers the initial wiring though.