|
Welcome, Guest
|
TOPIC: MPP 2.0 screw sizes
MPP 2.0 screw sizes 3 months 2 weeks ago #73856
|
Anyone know what size the hex screws on the MPP are? The two on the switch plate are both larger than the smallest one I have, and smaller than the one above that, and the set screw on the front of the emitter is larger is in the same "in between"; larger than my second smallest key, but smaller than the one above it. I just purchased an "accurate screw kit" from a vendor on facebook, but I don't know if/how the sizes will be different.
|
|
 |
MPP 2.0 screw sizes 2 months 3 weeks ago #74433
|
So I just got the "hardware accuracy kit" and replaced the two little screws on the switch plate. Those are the really important ones, but when it comes time to disassemble I'll still need something for these other screws. I've got some pictures this time:
I'm also wondering what the best way to do LED retention is. At first I'd thought it would be this lower thumbscrew here, but the one right above that (not the other thumbscrew) is doing blade retention, so that won't work, will it? |
|
|
|
MPP 2.0 screw sizes 2 months 3 weeks ago #74450
|
^^^^^ This
I did the same thing, hardware accuracy kit. |
MPP 2.0 screw sizes 2 months 3 weeks ago #74489
|
Yeah, I really like the replacements. Today or tomorrow I think I'll swing by a hardware store to find out what allen keys I need for the other screw.
|
|
|
|