|
Welcome, Guest
|
TOPIC: looking for a 12mm Brass switch
looking for a 12mm Brass switch 3 months 1 week ago #74014
|
Does anyone have any leads on where to find a 12mm brass momentary switch for an ASP build? I can only seem to find them in 16mm and that wont work. I've heard of people sanding down the Saberforge switches to reveal the brass underneath. has anyone tried this with either a lit and unlit switch?
also if someone is willing to sell a brass switch please let me know. thank you! |
|
1) ASP saber (no name) - Champion 12w+ Green
2) ASP saber (valor) - Warrior 12w+ Light Blue 3) Apprentice Disciple - Champion 12w+ Purple |
looking for a 12mm Brass switch 3 months 1 week ago #74021
|
I don't have one to sell, but I know you can indeed sand down the SF switches to reveal the brass underneath. I have a Guardian that was customized by SF with that very thing. See pics HERE.
|
|
The following user(s) said Thank You: DD003
|
looking for a 12mm Brass switch 3 months 1 week ago #74022
|
Try here
|
|
No matter where you go, there you are.
The following user(s) said Thank You: DD003
|
looking for a 12mm Brass switch 3 months 1 week ago #74062
|
I just looked at the pictures and that saber is beautiful man! thanks for the help, I might try that with some extra switches I have.
|
|
1) ASP saber (no name) - Champion 12w+ Green
2) ASP saber (valor) - Warrior 12w+ Light Blue 3) Apprentice Disciple - Champion 12w+ Purple |
looking for a 12mm Brass switch 3 months 1 week ago #74063
|
Wamphyri13, Thanks for the link, I ordered two brass and one blue. I don't know if they'll work cause the threads look a little short, but hey its worth a shot. Thanks again!
|
|
1) ASP saber (no name) - Champion 12w+ Green
2) ASP saber (valor) - Warrior 12w+ Light Blue 3) Apprentice Disciple - Champion 12w+ Purple |