|
Welcome, Guest
|
TOPIC: Saberforge switches
Saberforge switches 6 months 4 weeks ago #23588
|
just wondering if its possible to purchase the saberforge latching AV switches that are used on warrior tier sabers separately, i have a saber project im working on and have been told that the SF switches are smaller then ones from other places and fit easier in most sabers
|
Saberforge switches 6 months 4 weeks ago #23601
|
12 mm Anti Vandal switches on ebay, Google,& TCSS. Momentary or latching
|
Saberforge switches 6 months 3 weeks ago #23613
|
the ones on ebay i wouldnt trust as a lot ive seen say latching and momentary and have copy pasted descriptions, there are a few good ones ad i will use them as a last resort, TCSS only have latching switches that are over an inch in diameter so no good for the purpose i have in mind (recessed AV switch modification rather then poking up into the grip)
and if i were to give money to any saber shop my preference is always saberforge |
Saberforge switches 6 months 3 weeks ago #24017
|
I'm new and I'm trying to fix my saber. how do you take the av switch out?
|
Saberforge switches 6 months 2 weeks ago #24234
|
warm it up with a hairdryer / hot air gun, to loosen the glue, use a pair of needlenose plyers or a screwdriver to loosen and undo the bolt and then gently wedge a screwdriver between the hilt and the button guard to pry it out
thats usually how its done |