TOPIC: Hilt Design Gallery

Goyax wrote:

8" is a bit on the shorter side. Typical hilt lengths go from 10-12" or so. But the 8 is great if you plan on dual wielding or want single handed hilts. The 10-12" hilts are able to be used one, or two handed.

Here are a few that I've designed. I hope they meet with approval and enjoyment:


Mekallkir - clean, jedi, two-handed dueling saber




Grevtor - old world, semi-flashy, gladiatorial saber



Dark Arts - techy, Sith, bad ass saber



Apothicon - techy, jedi saber


Old Ways - beat up, old relic saber


I'm already jonesing for new ASP piece releases, but what's here is more than enough to make some really rad stuff!

I like 'em all! Wonderful/addicting thing, that saber creator.

It really is. You have no idea how many times my girlfriend has had to pull me off of that thing to go to bed. And she's droolworthy. But that saber creator is too

While it might be slightly damaging to my geek cred, I believe there is really only one correct response to a situation like that. Love my sabers, and all that entails, but there are higher priorities.

Since the rebel isn't back I tried to make it on the ASP, but i have no idea what the price will be on it.

Played around with the saber builder again. Like my first one better, but this is pretty rad, iidssm.

I just ordered my PS, but I wanted to play around with the ASP creator...

Darth Nihl inspired


Furious Redemption Shoto ReForged

I'm trying to decide if I to get this down the road, or just order an Exhalted now. I really love this design, but I wish I could get ASP in gray weathering. I almost did buy it but then saw the early fundraiser for it was over. I'm pretty damn sure this is the design I want because I ALWAYS keep coming back to it.

I named her Mercy


Adaptive Saber Parts
http://www.adaptivesaberparts.com/#/configure?code=4.137.1.0-3.109.1.0-2.52.1.0-1.10.1.0-7.152.13.0-6.149.3.0-5.143.0.0-8.154.0.0

Parts
ASP . Sinister Prophecy Pommel . Standard
ASP . Venom Body . Standard FLIPPED
ASP . Switch 8 . Standard
ASP . Emitter 8C . Standard
ASP . Led 12W+ . Mint Green
ASP . Blade Plug 4 . Silver
ASP . Blade 32'' . null
ASP . Sound Viridian . null




how do I get the pictures like I see posted here? I saw not snapshot feature on the saberparts page

You'd just have to make a screenshot of it and upload it here, or to an image hosting site.

Borommakot wrote:
Oh. Well you can just as easy copy/past the link to see it, so no biggie. Hope ya guys liked that Mercy I made. This was another one I would like to get, but not so as much as that previously posted Mercy. Really kicking myself for not getting the two saber indiagogo thing, but no funds at the time and no funds at all for a saber for at least another month. Really a bummer since I found out about this hobby in like July and have been trying to scratch up the money to get at least 1 saber (but there are like 5 I want lol)

I call this one Righteous


Adaptive Saber Parts
http://www.saberparts.com/#/configure?code=4.129.4.0-3.92.1.0-2.54.1.0-1.33.1.0-7.152.12.0-6.146.3.0-5.143.0.0-8.154.0.0

Parts
ASP . Jade Pommel . Black
ASP . Fury Body . Standard
ASP . Switch 10 . Standard
ASP . Rebel Emitter . Standard
ASP . Led 12W+ . Cyan
ASP . Blade Plug 1 . Silver
ASP . Blade 32'' . null
ASP . Sound Viridian . null





Which of the two sabers I posted do you guys like best?






And for the fun of it, here's them combined as a staff


Adaptive Saber Parts
http://www.saberparts.com/#/configure?code=5.142.0.0-7.152.13.0-1.10.1.0-2.52.1.0-3.109.1.0-9.158.4.0-3.92.1.0-2.54.1.0-1.33.1.0-7.152.12.0-6.146.3.0-5.142.0.0-8.154.0.0

Parts
ASP . Blade 26'' . null
ASP . Led 12W+ . Mint Green
ASP . Emitter 8C . Standard
ASP . Switch 8 . Standard
ASP . Venom Body . Standard
ASP . Male 4 . Black
ASP . Fury Body . Standard
ASP . Switch 10 . Standard
ASP . Rebel Emitter . Standard
ASP . Led 12W+ . Cyan
ASP . Blade Plug 1 . Silver
ASP . Blade 26'' . null
ASP . Sound Viridian . null

Here's a little youngling hilt design for children and newbs.



http://www.saberparts.com/#/configure?code=4.122.1.0-3.93.1.22-2.49.1.0-1.19.1.0-7.152.9.0-6.145.3.0-5.142.0.0-8.154.0.0

Parts
ASP . Dissident Pommel . Standard
ASP . Gladius Body . Standard . Bronze Stingray
ASP . Switch 5 . Standard
ASP . Gladius Emitter . Standard
ASP . Led 12W+ . Light Blue
ASP . Apprentice Plug . Silver
ASP . Blade 26'' . null
ASP . Sound Viridian . null

I was playing around and as soon as I put Pommel 6 on a hilt I thought, "I need to make an atomic bomb design." So Here I present "The Oppenheimer"

The Oppenheimer Build









I started with pommel 6, because its resemblance to fins on a bomb, then attached a Fallen body for the smooth artillery feel, next the Dissident switch section adds the bulkiness I associate with bombs, I tipped the hilt with a silver Emitter no. 7, because I like how it looks like the power within is exploding out through all the windows. (Obviously I had to go with a nuclear lime green). And for this design I ended with plug no 2 because it tapers nicely like a detonation cap.

I dig, Tuckris, I dig.

Wow Tuckris,

The first thing I thought when I saw your design was "Tall Boy" and "Blue Steel" two rather large bombs that the UK RAF used to use! I think you got the look just right!

For Tyeth

Thank you! Glad you all like it.

I almost called it Thin Man after one of the Bombs worked on during the Manhattan project.

I'm glad you didn't. Thin Man just makes me think of XCOM, heheh.