Welcome, Guest

Forum

Saber Forge Forum

Open Topics

Monarch Crystal chamber

TOPIC: Monarch Crystal chamber

Monarch Crystal chamber 2 days 2 hours ago #54020

SuUpberSith Offline Elite Member Posts: 241 Thank you received: 52	Hey guys I need to know the Monarch Crystal chamber length Bottom to top and side to side. Looking at getting a Tritium setup in there, but need the dimensions. Thank you
	Rev-N Elite VV Weathered Reborn Hero SF Weathered Monarch ChampionSF Dominix LE V4 Staff Stunt US Tempest Elite VV The administrator has disabled public write access.

Monarch Crystal chamber 2 days 1 hour ago #54022

Execute66 Online Platinum Member Posts: 394 Thank you received: 101	SuUpberSith wrote: Hey guys I need to know the Monarch Crystal chamber length Bottom to top and side to side. Looking at getting a Tritium setup in there, but need the dimensions. Thank you About 13.5 inches from the tip of the Graflex shroud and about 1.4 inches wide, where I measured the width of the gripe section excluding the handle bars.
	"I am the Senate" The administrator has disabled public write access.

Monarch Crystal chamber 1 day 20 hours ago #54053

SuUpberSith Offline Elite Member Posts: 241 Thank you received: 52	Thank you!!! I really appreciate you taking the time to do that
	Rev-N Elite VV Weathered Reborn Hero SF Weathered Monarch ChampionSF Dominix LE V4 Staff Stunt US Tempest Elite VV The administrator has disabled public write access.

Monarch Crystal chamber 1 day 19 hours ago #54070

OvrcAHst
Offline
Platinum Member
Grey - it is OvrcAHst.
Posts: 922
Thank you received: 530

SUbS, HeyBud, so I threw this together for ya.

The actual Crystal Chamber measures 2.75" including the mounting base that houses wiring and shield that contains both ends. The Chamber length with support rods measures 2.00".

The actual Crystal less everything else = 1.00". The width (dictated by shroud) = 1.50" designed to be consistent to the overall OD width. The occupied width contained within the support rods = .78" (or there abouts). Hope it helps Mate.

Attachments:

CC.png (0KB)
CC1.png (0KB)

Last Edit: 1 day 19 hours ago by OvrcAHst.

The administrator has disabled public write access.

The following user(s) said Thank You: SuUpberSith

Monarch Crystal chamber 1 day 19 hours ago #54081

SuUpberSith Offline Elite Member Posts: 241 Thank you received: 52	That should help a great deal! Thank you
	Rev-N Elite VV Weathered Reborn Hero SF Weathered Monarch ChampionSF Dominix LE V4 Staff Stunt US Tempest Elite VV The administrator has disabled public write access.

Monarch Crystal chamber 1 day 19 hours ago #54084

SuUpberSith Offline Elite Member Posts: 241 Thank you received: 52	Hoping to be able to cut one of these to fit!!?? Whatcha guys think
	Rev-N Elite VV Weathered Reborn Hero SF Weathered Monarch ChampionSF Dominix LE V4 Staff Stunt US Tempest Elite VV Last Edit: 1 day 19 hours ago by SuUpberSith. The administrator has disabled public write access.

Monarch Crystal chamber 1 day 18 hours ago #54089

OvrcAHst
Offline
Platinum Member
Grey - it is OvrcAHst.
Posts: 922
Thank you received: 530

SUbS, Without a doubt they are very pretty. I imagine them to be ideal on display when not ignited. How effective are they with light shining through them? If it works can actually picture a techno-colour effect virtually like a designated RGB coloured Crystal instead of a dedicated single colour. I wish you luck though as I reckon you'd need some special surgical precision and accuracy to remove the old and fasten the new. You definitely have to show pictures if it yields success.