|
Welcome, Guest
|
TOPIC: Emitter 10 Question
Emitter 10 Question 2 days 20 hours ago #77292
|
To anyone who has ASP emitter #10, is the outer shroud removable? If so, what is the inner diameter of the outer shroud, and can anyone post a photo of what the emitter looks like with the shroud removed? Thanks to anyone who might be able to help.
|
Emitter 10 Question 2 days 16 hours ago #77302
|
Yes, it is. The blade retention screw doubles as the shroud retention screw. I can take measurements and post some pics when I get home from work.
|
Emitter 10 Question 2 days 14 hours ago #77307
|
Well, I lied. It's actually a bit more complicated lol. It both threads on and is retained by the screw, plus it's superglued.
The ID of the shroud is about 35.5mm, or 1.4". The OD of the inner part of the emitter is about 31.7mm, or 1.25". The gap between the shroud and emitter makes more sense now with the threading, lol.  Ewwwww, it's naaaaaaaked!  
|
|
The following user(s) said Thank You: Rennek, scifidude79
|
Emitter 10 Question 2 days 13 hours ago #77308
|
Thanks Kelborn. I was kind of thinking about ordering one and using the shroud on my Bastion. Thought I might cut a few openings for the emitter windows.
|
Emitter 10 Question 2 days 11 hours ago #77310
|
Hmm... that might be able to work. Bastion OD is 1.35", so you'd have a 0.05" gap between the emitter and shroud. Space the gap with some electrical tape maybe, and I'd drill and tap a second retention hole to be safe.
|
|
The following user(s) said Thank You: Rennek
|