TOPIC: HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER?

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 3 days 2 hours ago #60273

Froboy696 Offline Premium Member Posts: 123 Thank you received: 12	The hole where it holds/releases the blade won't come out/loose no matter how many times I spin it to the left. I think that it's stripped??? Has anyone experienced this??
	The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 3 days 1 hour ago #60279

SuUpberSith Offline Elite Member Posts: 281 Thank you received: 56	Sounds like it is stripped. Get hold of SF if still under warranty
	Rev-N Elite VV, Dark Ardent VV Monarch SF, Custom by J. Moll Weathered Dark Acolyte VV Korbanth, Graflex, K4 Tempest Elite VV The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 3 days 1 hour ago #60282

NeBosa Offline Platinum Member Do no harm, but take no shit. Posts: 915 Thank you received: 254	I'm curious to know how much you tightened it? The set screw is only 1/8" long. Perhaps you turned it in too far to the point where it came out the other end so may no longer be threaded in place?
	The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 3 days 1 hour ago #60283

Froboy696 Offline Premium Member Posts: 123 Thank you received: 12	NeBosa wrote: I'm curious to know how much you tightened it? The set screw is only 1/8" long. Perhaps you turned it in too far to the point where it came out the other end so may no longer be threaded in place? It's just stuck in place; it's not deep at all. In fact, it looks like how it's suppose to look at first glance. it just won't 'come out'.
	The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 1 day 21 hours ago #60421

Froboy696 Offline Premium Member Posts: 123 Thank you received: 12	UPDATE: I finally got the little shit out. It stripped so much to the point where I had to use my other handy while applying a lot of force to remove the stripped screw. But now I need to replace it. Know where I can order said part?
	The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 1 day 16 hours ago #60434

jonnys95s10 Offline Senior Member Posts: 46 Thank you received: 35	The thread is #8-32 and a new set screw or thumb screw could be picked up at most hardware stores.
	The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 1 day 2 hours ago #60479

=Ottomatix= Offline Platinum Member "The fear of loss is a Path to the Darkside, Train yourself to Let Go of everything you Fear to Lose" Posts: 1043 Thank you received: 370	The thumb screws are 8/32 and are steel. The hilts are Aluminum, so are the screw's threads stripped or the hole in the saber? Most likely the threads in the hole are damaged!
	Last Edit: 1 day 2 hours ago by =Ottomatix=. The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 9 hours 16 minutes ago #60538

Froboy696
Offline
Premium Member
Posts: 123
Thank you received: 12

=Ottomatix= wrote:

The thumb screws are 8/32 and are steel. The hilts are Aluminum, so are the screw's threads stripped or the hole in the saber? Most likely the threads in the hole are damaged!

No the hole where you insert the tool to actually rotate it within the hold of the saber itself was stripped. it would not rotate at all until I moved a size up. It got stuck on my size up but no indication whatsoever of the saber itself being damage with its thread.

SO,

THE SCREW IS DAMAGED, NOOOOOOOOT THE SABER ITSELF.

The administrator has disabled public write access.

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER? 9 hours 4 minutes ago #60543

=Ottomatix= Offline Platinum Member "The fear of loss is a Path to the Darkside, Train yourself to Let Go of everything you Fear to Lose" Posts: 1043 Thank you received: 370	Geez man alright, you really didn't clarify that very well. When you mention stripped screw, most of us here assumed you ment the TREADS and not the FASTENERS HOLE! Carry ON,,,,,
	The administrator has disabled public write access.

Forum

Saber Forge Forum

Open Topics

HELP ! CAN'T REMOVE BLADE; BROKEN TIGHTENER?