TOPIC: Speaker

Hey forum!! I just received my Hero Tier Bastion today and I love it but I am having a lot of trouble getting the speaker out to access the SD card. I obviously don't wanna use too much force and break the thing so would any of you saber enthusiast give me any tips or solutions? Would be very appreciated

I'm not sure about Hero tier sabers, but for ASP at least the speaker is attached to a chassis which holds the battery and electronics. It should all come out as one unit. Usually it'll come out if you shake the hilt really hard to get the speaker to protrude a little, then gently pull on it. Be careful not to touch the front of the speaker, only the sides and back.

While putting it back in, it's a good idea to put a ribbon under the battery and leave it hanging out a little past the speaker so you'll have something to pull on in the future. The somewhat tricky part is getting the chassis back inside without pushing on the speaker, making sure to get all the wires crammed into a place where they can rest safely.

praedyth wrote: Mate, Congratulations with successful delivery of (*quote =Ottomatix=*) Your New Weapon! Don't forget to share some pictures.

Ensure Kill Key is plugged in.



The Speaker is contained within a housing made of grey PVC. Stuck to one side is the fluffy, non-sticky side of Velcro Tape and a short tab for pulling it out. The fit is tight and shaky and pulling fights against the female threads. Pull the tab gently to loosen the housing and alternating a gentle press on opposite sides on the inside of the PVC, tease and pull repeatedly to guide it over the bumpy road of the threads. Once near the Outer-Rim , slowly guide the speaker and housing out without yanking as it's just wires on the darkside. The Velcro tab is handy however mounted on one side means that its intended use does not enable a centred pull.





You'll need some needle nose pliers (closed) to press against the SD card and hear a click from eject. Same pliers (open) and carefully grab the Card and remove.

Hope this helps.