|
Welcome, Guest
|
TOPIC: New Saber speaker issue
New Saber speaker issue 3 months 1 week ago #64111
|
I just received my first saber. I got a 12+W Indigo Venomous Fury. It is amazing and i love everything about it, but i can hear a rattle coming from inside and when i remove the pommel I can see the speaker is loose inside. Is this something I should send back to have fixed? Will it lead to problems down the line or is it something I should not worry about?
Thank you for any help! |
New Saber speaker issue 3 months 6 days ago #64123
|
Normally, the speaker (in the case of a Champion saber) is held in with a "C" ring. The ring can get knocked out of position during shipping, and just needs to be snugged up against the speaker. If you don't have the specific tool for handling "C" rings, I have used the open end of a saber blade to gently push the ring back into position. Just don't smash it hard against the speaker. If that does not solve it, contact Customer Service at This email address is being protected from spambots. You need JavaScript enabled to view it.
.
|
|
Imagine what you will know tomorrow....
|
New Saber speaker issue 3 months 6 days ago #64126
|
The tool mentioned by Brax is relatively inexpensive at most hardware or automotive shops. Pushing your blade up gently should move it back to the groove for it to snap back into place, also mentioned by Brax is a great substitute if you don't want to purchase a tool for a one-time task.
|
New Saber speaker issue 3 months 6 days ago #64158
|
Thank you everyone! The blade trick worked and there is no more rattling!
|