|
Welcome, Guest
|
TOPIC: Purple LED problem
Purple LED problem 9 months 14 hours ago #19786
|
I have a 12W purple Fallen by Saberforge that I recently sent out to get quick connects put in for future LED changes. Everything booted up just fine, the LED was purple as usual, and then I decided to take a look at the quick connects to see how easy it would be when I went to change out the LED.
After I reinserted it back into the saber, the LED is now completely blue. I thought maybe the batteries were low, but after charging completely the LED is still blue. I checked the quick connects and everything looks fine, but if I move the wires a little sometimes the color will return to normal for a split second before turning blue again. The question is, what did I do wrong? I was delicate with LED, only needed a set of pliers to get them out of the hilt, and I didn't tug on the wiring at all. Is there any way to fix it, or should I just send it back in? Thanks for any help. |
|
Fallen 12W Purple/12W+ Red
Epoch 6W Cyan Reborn 12W+ Indigo DT Next Order: Parks/Korbanth Graflex 2.0 |
Purple LED problem 9 months 13 hours ago #19788
|
Sounds like a loose connection.
As per forum rules, send SF an email to get their assistance at This email address is being protected from spambots. You need JavaScript enabled to view it. |
 |
Purple LED problem 8 months 4 weeks ago #19845
|
Thanks, I've sent out the email and have gotten a response. Should be taken care of quickly.
|
|
Fallen 12W Purple/12W+ Red
Epoch 6W Cyan Reborn 12W+ Indigo DT Next Order: Parks/Korbanth Graflex 2.0 |