Welcome, Guest
Username: Password: Remember me
Threaded Indented

TOPIC: Stands and Sounds

Stands and Sounds 6 months 2 weeks ago #28492

  • Thorngren
  • Thorngren's Avatar
  • Offline
  • Senior Member
  • Posts: 46
  • Thank you received: 5
Hello. I was going to order a saber and saw the option for two types of display stands (Phoenix and Imperial). However, after searching the site I couldn't seem to find any photos of these. I also did a forum search on stands and didn't spot anything either. Wondering if any folks could post a picture of them or give thoughts. also if anyone had a link to the differences between the two sounds you can choose from, that would be helpful too. Thanks
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28493

  • Snakeeyz99
  • Snakeeyz99's Avatar
  • Offline
  • Platinum Member
  • Posts: 322
  • Thank you received: 107
There are pictures of the saber stands available on the Etsy page:

Imperial

Phoenix

If you're looking for a video about the Viridium and Crimson sound fonts, I can't link one directly but I'm pretty sure Shameem Moshrefzadeh on Youtube has a few videos showing them off.
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28495

  • Borommakot
  • Borommakot's Avatar
  • Offline
  • Platinum Member
  • May the force be with us.
  • Posts: 1198
  • Thank you received: 432
You can also preview the soundsin the ASP builder at http://www.saberparts.com

Edit:not sure how sounds became themes. Fixed.
Last Edit: 6 months 2 weeks ago by Borommakot. Reason: Sp
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28496

  • Errant Knight
  • Errant Knight's Avatar
  • Offline
  • New Member
  • Posts: 16
  • Thank you received: 3
The two stands are either the imperial or rebel symbol. A quick google search will pop them up. I'm not sure how to post pics on here or I would.
You want me to shake hands with you in hell? I shall not disappoint you!
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28503

  • For Tyeth
  • For Tyeth's Avatar
  • Offline
  • Platinum Member
  • Posts: 1611
  • Thank you received: 635
Hi all,

Just went onto the Etsy site and pulled these pictures for you

Phoenix Stand









Imperial Stand










Please note SABERS NOT INCLUDED!

I hope these pics help

For Tyeth
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28523

  • Thorngren
  • Thorngren's Avatar
  • Offline
  • Senior Member
  • Posts: 46
  • Thank you received: 5
Thank you all so much for the fast and helpful replies.


I just have 1 more question if you don't mind. I assume the AV switch that lights up is the same color as the blade you order, but what color do they make it if you get the option for two colors on your blade? I was thinking of getting a hero edition so I could have 2 blade colors (can't pick between Amber and Purple) but was thinking it might look weird having a purple saber with an amber switch. Do you pick the switch color or do they? and is it possible to get the switch with a different color than your blade if you get a saber with only 1 blade color?
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28524

  • Snakeeyz99
  • Snakeeyz99's Avatar
  • Offline
  • Platinum Member
  • Posts: 322
  • Thank you received: 107
You can see it on some of the Hero order pages, but for the Hero you have 2 switches: a normal and an aux. Each matches one of your colors. If you have color A lit, switch A will light but switch B will not. With both colors on both switches will light up as well.

If you want to choose a switch color different from your blade color, I think you just have to put it in the order comments.

Edit: Grabbed examples:



Last Edit: 6 months 2 weeks ago by Snakeeyz99.
The topic has been locked.

Stands and Sounds 6 months 2 weeks ago #28542

  • Brax
  • Brax's Avatar
  • Offline
  • Administrator
  • Posts: 2044
  • Thank you received: 731
I have not done it on any currently owned sabers, but have considered it for my next purchase for the exact reasons you mentioned about the color of the AV switch, which is to look into getting no color (if possible), or white. Perhaps that would help alleviate your color matching anxiety. ;) B)
Imagine what you will know tomorrow....
The topic has been locked.

Stands and Sounds 6 months 1 week ago #30066

  • Thorngren
  • Thorngren's Avatar
  • Offline
  • Senior Member
  • Posts: 46
  • Thank you received: 5
Thanks for your answers guys.

Before I finally make my purchase (for that much cash I gotta think on it) I was wondering if anyone has see a Saber with both Purple and Amber. I think if picking two colors, I gotta pick two that also look good mixed


I guess I should also ask this. For all the 1 color sabers I've seen, there's a big knob under the activation button. Is that just a placeholder for where a second colored button would be and if so, does it have an actual canonical purpose as well? Does it have to be removed to activate it? I always see it popped off when on and its just an empty hole.
Last Edit: 6 months 1 week ago by Thorngren.
The topic has been locked.

Stands and Sounds 6 months 1 week ago #30098

  • Mihoshi
  • Mihoshi's Avatar
  • Offline
  • Premium Member
  • Posts: 90
  • Thank you received: 22
It's the kill switch.
You pull it out to turn the saber on and put it back in to turn it off (kill it).

On a hero saber it's on the "bottom" side of the hilt since there are 2 AV switches on the top.

On a champion saber it's on the top where the 2nd switch would be.
The topic has been locked.
Threaded Indented

Member Login

Latest Posts

    • DIY Sound Board Breakdown... (109 Posts)
    • HotRod, in any way your info was misleading. Its about gathering enough information in order to make...
    • SF Quad Cree Mixing Combi... (69 Posts)
    • Quote: If you want to use lots of day blades, I'd say to just get a white LED. True. And if I got an empty...
    • Adding sound to Warrior t... (7 Posts)
    • That second NEC all in one chassis is interesting. Having an internal recharge port would allow for...
    • Themed Sabers (712 Posts)
    • The name for this saber comes from the common name of an ancient Greek coin from Athens, bearing an...

More Topics »

Forum Statistics

  • Total Users: 4370
  • Latest Member: TheWinterWild
  • Total Posts: 43.1k
  • Total Topics: 3139
  • Total Sections: 22
  • Total Categories: 104
  • Today Open: 4
  • Yesterday Open: 4
  • Today Answer: 42
  • Yesterday Answer: 64