Welcome, Guest
Username: Password: Remember me
Threaded Indented

TOPIC: Exhalted 32inch Blade Indoor Spinning

Exhalted 32inch Blade Indoor Spinning 1 year 2 months ago #56325

  • Brady329
  • Brady329's Avatar
  • Offline
  • Premium Member
  • Posts: 92
  • Thank you received: 73
Attempting to spin my Exhalted indoors with the 32inch blade. Been watching tutorials online but am far from a pro. lol


P.S. : Yes, I was watching one of DarthMario's many YouTube saber reviews. You could say I now have a bit of an obsession with the subject... B)
Last Edit: 1 year 2 months ago by Brady329.
The administrator has disabled public write access.

Exhalted 32inch Blade Indoor Spinning 1 year 2 months ago #56372

  • RyanRising
  • RyanRising's Avatar
  • Offline
  • Platinum Member
  • How hard can rocket science be anyway?
  • Posts: 453
  • Thank you received: 143
I'm glad it's not just me who can't get a good balance on the clash value. Maybe the board just doesn't detect them very well.
The above post may be subject to editing. A lot of editing.
The administrator has disabled public write access.

Exhalted 32inch Blade Indoor Spinning 1 year 2 months ago #56388

  • Brady329
  • Brady329's Avatar
  • Offline
  • Premium Member
  • Posts: 92
  • Thank you received: 73
RyanRising wrote:
I'm glad it's not just me who can't get a good balance on the clash value. Maybe the board just doesn't detect them very well.

Yeah, its my only nitpick about the entire saber. My Clash sensitivity was a tad high at 6 i think, but I still would like it to be more accurate. Upgrading to a NEC Spark 2 Soundboard later this year so that I can get better motion tracking and a much larger amount of sounds while keeping my 12w+ LED.
Last Edit: 1 year 2 months ago by Brady329.
The administrator has disabled public write access.

Exhalted 32inch Blade Indoor Spinning 1 year 2 months ago #56420

  • MommyHoldMe
  • MommyHoldMe's Avatar
  • Offline
  • Platinum Member
  • Posts: 630
  • Thank you received: 238
We all had to start somewhere, you looked go so far. Will you update us when you switch boards?
You give life, You are love.You bring light to the darkness.
You give hope, You restore every heart that is broken.
The administrator has disabled public write access.
The following user(s) said Thank You: Brady329

Exhalted 32inch Blade Indoor Spinning 1 year 2 months ago #56445

  • Brady329
  • Brady329's Avatar
  • Offline
  • Premium Member
  • Posts: 92
  • Thank you received: 73
MommyHoldMe wrote:
We all had to start somewhere, you looked go so far. Will you update us when you switch boards?

Most definitely!
The administrator has disabled public write access.

Exhalted 32inch Blade Indoor Spinning 1 day 23 hours ago #77358

  • Brady329
  • Brady329's Avatar
  • Offline
  • Premium Member
  • Posts: 92
  • Thank you received: 73
A very late update now that I've got the Spark 2 board! I will try a Plector Labs with my Graflex but I doubt I'll like them any more than NEC. Sensitivity is spot on in my opinion!

The administrator has disabled public write access.

Exhalted 32inch Blade Indoor Spinning 8 hours 39 minutes ago #77398

  • Darth Squidious
  • Darth Squidious's Avatar
  • Offline
  • Elite Member
  • Posts: 204
  • Thank you received: 77
I like the NEC boards for the upper tier options, but I haven't worked with the higher end Plectors.

I'll try Plector on my next crossguard build, I have had nothing but problems with the NEC x-drive set up, but that could be user error.

As far as being obsessed with sabers, it happens. Personally, I had 3 sons just so I could play with toys till I'm 50.

And be careful, I have lost many a light fixture to showing off with a new saber. I did precision drill in the Navy where I had to learn to spin M-14s filled with concrete (I'm not joking) and your snake transitions are much smoother than mine.
If there is only one hot chick in the galaxy... And she's your sister.

You might be a redneck.
Last Edit: 8 hours 36 minutes ago by Darth Squidious.
The administrator has disabled public write access.
The following user(s) said Thank You: Brady329

Exhalted 32inch Blade Indoor Spinning 8 hours 5 minutes ago #77399

  • Brady329
  • Brady329's Avatar
  • Offline
  • Premium Member
  • Posts: 92
  • Thank you received: 73
I would message https://www.facebook.com/saberigniter/ about the problem with the X-drive. He usually answers very quickly and is extremely helpful when you have problems with his products. Thanks for the compliment!
The administrator has disabled public write access.
Threaded Indented

Member Login

Latest Posts

    • Custom Installers & S... (29 Posts)
    • Archon's are def long enough. They measure 12-13ish IIRC. Plenty of room to make it work. Def needs...
    • The Wait Begins 4.0 (763 Posts)
    • I am 11 weeks into a Legacy Grand Master Staff, I ordered it on 5/2/17.. :)
    • New Member Introduction T... (2467 Posts)
    • Thanks guys for the Welcome, I tried to quote and reply to each but not too saavy yet with this...
    • Custom Installers & S... (29 Posts)
    • Quote: D'aw tanks! That one sold thankfully, couple more to sell so I can work on the next set :P All I...
    • Want to Ask Phil a Saber ... (55 Posts)
    • Any idea how many more of the 100 Mpp Mk1's are still available?

More Topics »

Forum Statistics

  • Total Users: 5422
  • Latest Member: GM_Satele_Shan
  • Total Posts: 57.1k
  • Total Topics: 4781
  • Total Sections: 22
  • Total Categories: 120
  • Today Open: 0
  • Yesterday Open: 2
  • Today Answer: 2
  • Yesterday Answer: 25