|
Welcome, Guest
|
TOPIC: Urgent help needed!
Urgent help needed! 4 months 2 weeks ago #45036
|
Sorry guys look here's the situation, I know the probably belongs in the DYI section but it wouldn't be seen there.... Has anyone had any experience or know anything about installing sound on a warrior tier apprentice? Is it true SF are realeasing a sound module with ASP? Thanks guys
|
Urgent help needed! 4 months 2 weeks ago #45038
|
Yes, there are people who have experience with installing sound on a warrior tier apprentice, though I'm not one of them, and yes, there will be a sound module, but you'll have to wait until ASP releases. It might not even fit the apprentice level sabers when it does come out, though.
Why is this urgent, though? |
|
The above post may be subject to editing. A lot of editing.
|
Urgent help needed! 4 months 2 weeks ago #45039
|
I can't give you 100% clarification on your second question. But I can tell you that installing electronics otherthan Saberforge's sabercore is a bit tricky or even difficult for the less experience; the apprentice hilts are smaller in length AND diameter. This is what gives them their great weight and comfortability. So if you want to do a DiY on one, I hope you already know what to do or have someone to help you out. Apprentice hilts have really tight space and it can get crammed in there from what I've seen and been told. I'm not sure if the nano-biscotte V3 will fit in there. Can someone clarify this for my dude over here? Thanks
|
|
Light and darkness, you cannot have one without the other. To achieve equilibriem you must be in harmony with both; the path between.
|
Urgent help needed! 4 months 2 weeks ago #45040
|
I also forgot to add that apprentice hilts are different from elites because they're one solid piece plus a pommel rather than several pieces. So that's another factor to consider.
|
|
Light and darkness, you cannot have one without the other. To achieve equilibriem you must be in harmony with both; the path between.
|
Urgent help needed! 4 months 2 weeks ago #45041
|
greyjediDude wrote:
I can't give you 100% clarification on your second question. But I can tell you that installing electronics other than Saberforge's sabercore is a bit tricky or even difficult for the less experience; the apprentice hilts are smaller in length AND diameter. This is what gives them their great weight and comfort. So if you want to do a DiY on one, I hope you already know what to do or have someone to help you out. Apprentice hilts have really tight space and it can get crammed in there from what I've seen and been told. I'm not sure if the nano-biscotte V3 will fit in there. Can someone clarify this for my dude over here? Thanks
The Nano Biscotte fits inside a 1" blade, so I think it'll fit inside the Apprentice hilts. I mean, they have to have a blade fit in them, right? |
|
The above post may be subject to editing. A lot of editing.
|