|
Welcome, Guest
|
TOPIC: Champion Sensitivity
Champion Sensitivity 8 months 3 days ago #22332
|
Hey! I was told that you can change the sensitivity on the Champion saber but was never told how to do it. Anybody know?
|
Champion Sensitivity 8 months 3 days ago #22337
|
This is covered in the FAQ section of the forum.
Q - How do I access the onboard menu on the Champion sabers?
A - This process is actually easier than you may think. All you need to do is hold down the power button for 3 seconds while the saber is powered off. You will hear it enter the menu, and give you options. Press the button once to cycle through the options. Once you have a setting you like, hold the button down for 3 seconds to advance to the next setting. Once you have reached the end of the menu, it will tell you that your settings have been saved, and the saber will turn on, and you can use it normally. Shameem also did a great overview of the Sabercore sound boards. At 3 minutes in, he demonstrates the menu navigation and operation. |
|
The following user(s) said Thank You: KitFisto
|
Champion Sensitivity 8 months 3 days ago #22338
|
Pull the kill key out, then hold down the button until you hear the onboard menu initiate. Follow the audio prompts by pressing the ignition button and releasing immediately after. When the desired option is presented, hold down the ignition button to confirm that option, then repeat for the next customizable option. When you are finish, by locking in the last one, it should be ready to go!
If you watch some YouTube reviews of their sabers, there are plenty of reviewers who go through the menu and you can follow along. 
|
|
Own: Avenger, Arctic Blue, 12w Champ
Waiting: Prodigal Son, Green 12w Champ Acolyte, Purple 12w Champ (wife) Wish: Bastion, Red 12w Champ |
Champion Sensitivity 8 months 3 days ago #22352
|
thank you! that helped a lot ^_^
|