TOPIC: LED Module Size Question

LED Module Size Question 6 months 23 hours ago #33261

Algeanon
Offline
New Member
Posts: 3

Hi all,

First time posting and new to the saber building scene. I am planning a build with a Saberforge hilt, not sure which one yet, but was wondering if I should start from a Initiate Level or Warrior Level.

I am planning to add a soundboard and do not want to use the 6w or 12w led that Saberforge provides. My concern is I do not know if the Heatsink from The Custom saber Shop will fit and secure into the Saberforge Hilt. I don't mind purchasing a Warrior Level Hilt if I need to have the specific LED Heatsink if Saberforge does not sell it by itself.

Thanks,

The administrator has disabled public write access.

LED Module Size Question 6 months 23 hours ago #33272

Elim Vos Online Senior Member Posts: 49 Thank you received: 11	Yes, they will fit. I've used them in two DIY build from SF. I would recommend these.. http://www.thecustomsabershop.com/Heatsink-module-for-1-ID-tubes-with-center-hole-P1011.aspx
	"You cannot play God then wash your hands of the things you've created. The day will come when you can't hide from the things you have done anymore." The administrator has disabled public write access. The following user(s) said Thank You: Algeanon

LED Module Size Question 6 months 22 hours ago #33274

Algeanon Offline New Member Posts: 3	Thank You for the reply. That helps me alot.
	The administrator has disabled public write access.

LED Module Size Question 6 months 17 hours ago #33311

=Ottomatix= Online Platinum Member "The fear of loss is a Path to the Darkside, Train yourself to Let Go of everything you Fear to Lose" Posts: 1109 Thank you received: 439	Algeanon, something else to consider. Warrior tier has a latching switch. Most sabers with sound boards utilize a momentary switch. With that being said I would opt for an initiate hilt.
	The administrator has disabled public write access.

LED Module Size Question 5 months 4 weeks ago #33495

Algeanon Offline New Member Posts: 3	Thanks for that, I did not think about the switch. I am still trying to decide which saber right now. They all look cool. Maybe Sinister Prophecy or The Phoenix.
	The administrator has disabled public write access.

LED Module Size Question 5 months 4 weeks ago #33516

Jaden Korr
Offline
Platinum Member
"Remember, [Force] abilities are not inherently good or evil; it's how you use them." --Kyle Katarn
Posts: 921
Thank you received: 429

Algeanon wrote:

Thanks for that, I did not think about the switch. I am still trying to decide which saber right now. They all look cool. Maybe Sinister Prophecy or The Phoenix.

And if you go the Initiate hilt route, make sure you specify that you'd like the threads not glued. You can loosen it up with some heat, but why go through that if you don't have to. Or if you go with the Sinister Prophecy, you can get it via ASP and it will come unassembled anyway.

In any case, good luck with your build!

2005 MR Vader
B/B/W Graflex 2.0
yellow SF ASP Interceptor

The administrator has disabled public write access.

Forum

Saber DIY

Saber Electronics DIY

LED Module Size Question