|
Welcome, Guest
|
TOPIC: YELLOW LED
YELLOW LED 4 months 2 weeks ago #39351
|
I was recently trying to get a yellow blade with a white flash-on-clash. I then found that saberforge sells a yellow unit. Does anyone know if I can add a white diode to the unit or remove the yellow diodes and put them on a tri-rebel with a white diode?
|
YELLOW LED 3 months 3 weeks ago #43523
|
You can't just pop the dies of the LED base or add one if there isn't a space for it. Plus there aren't yellow dies in the SF yellow LED. The color is achieved using 2 amber dies and two green dies. If you want a yellow LED with a white flash on clash, you should check out thecustomsabershop.com and see if a Amber/Green/White combo could be made in either a Tri-Cree or Tri-Rebel.
Alternatively, if you are using a Nano Biscotti, it also has a "shimmer" on clash feature, where there is an intense flicker on clash instead of flashing a different color. You could use SF's 12W quad LED with this (although if you are using the v2 version instead of the new v3 you will have to hack the board using a power extender or PEx). |
|
Forum FAQ
2005 MR Vader, Graflex 2.0, ASP hilt |
