TOPIC: Sharp Edge fix

Sharp Edge fix 1 year 7 months ago #7704

Jedi Norch Keelm
Offline
New Member
May The Lord Be With You
Posts: 18
Thank you received: 2

All the people complaining about sharp edges,well complain no longer

At the hardware store is some 400 fine grit wet or dry sand paper that takes those sharp edges and makes them dull edges. All it takes is some elbow grease.

Just a little infomercial gag there but yeah,some fine grit wet or dry sandpaper works great for sharp edges, If your worried about it cutting the sandpaper,get a sanding pad from auto zone. They only cost like $5,hope this helps

The topic has been locked.

The following user(s) said Thank You: Knytiri

Sharp Edge fix 1 year 7 months ago #7719

Knytiri Offline Banned "Luminous beings are we, not this crude matter." Posts: 1517 Thank you received: 471	Great information to know, thanks! Was wondeRing what might be best to use on my coupler for my staff, lol. Some of those vents are kinda sharp.
	The topic has been locked.

Sharp Edge fix 1 year 7 months ago #7721

Jedi Norch Keelm Offline New Member May The Lord Be With You Posts: 18 Thank you received: 2	It doesn't hurt the saber either,unless you slip and you scrape the side of the saber but it just takes a steady hand and like 5 minutes of sanding
	The topic has been locked.

Sharp Edge fix 1 year 7 months ago #7723

cybernick Offline Junior Member Posts: 31 Thank you received: 9	I do not consider that as a solution since for Guardian I need to take of the shroud to sand. Otherwise the anodised paint will be damaged. Removing the shroud is warranty violation reason.
	The topic has been locked.

Sharp Edge fix 1 year 7 months ago #7726

Knytiri Offline Banned "Luminous beings are we, not this crude matter." Posts: 1517 Thank you received: 471	Removing the shroud isn't voiding the warranty.. just unscrew the covertech and it slides off, I've been told. Then you can sand the edges, and slide it back on, and rescrew in the covertech.
	The topic has been locked.

Sharp Edge fix 1 year 7 months ago #7738

Orion Skywalker Offline Premium Member Remember, concentrate on the moment. Feel, don't think. Use your instincts. Posts: 104 Thank you received: 5	Good to know for future references. Thanks
	The topic has been locked.

Sharp Edge fix 1 year 7 months ago #7743

Brax Online Administrator Posts: 2263 Thank you received: 821	Yes, good information. There is an Epoch on its way here, and knowing ahead of time how to deal with the sharp edges described on that saber is very good stuff!
	Imagine what you will know tomorrow.... The topic has been locked.

Forum

Saber Forge Forum

Open Topics

Sharp Edge fix