|
Welcome, Guest
|
TOPIC: ASP Kickstarter FAQs (Updated 7/9/15)
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 5 days ago #15820
|
It's an anodized silver which isn't abailable on the ASP parts.
|
|
Wish List: Rebel, Count, Insurgent, Regal, Legacy 2.0
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 5 days ago #15822
|
That's what I was afraid of. Oh well, I wonder if the silver is close enough or just go with the standard.
This Kickstarter is more a strain on my head than my wallet. Haha. |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 5 days ago #15825
|
it will depend from part to part. Here's the breakdown...
- Silver = part is all silver - Black = part is all black - Standard = part has both silver and black aspects - Weathered = black that is "weathered" down to show some of the silver beneath As for the Phoenix it can't be directly recreated but you could get something vaguely similar. However if you are referring to the brushed finish silver as it appears on etsy, then you're out of luck as that is currently not an ASP finish. Not sure if/when other finishes will be added, but I think I remember reading that in the later monthly expansions that they were going to look at some other finishes. |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 5 days ago #15826
|
Yeah, kind of a bummer. Maybe I'll just try to build something a little more unique and a full saber.
Thanks all. |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 4 days ago #15860
|
If I was to order basically just a redeemer through ASP, a few questions.
1: Is it the 2015 model? 2: What pommel goes with it? 3: Which emitter is the most accurate? It's all black with the different color top, but for asp it's either all black or all silver. 4: So I get a covertec belt clip for backing, but there isn't a covertec on the saber? |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 4 days ago #15863
|
Is it the 2015 model?
It'll be the ASP iteration of the 2015 model.
What pommel goes with it?
To my eyes the Jade looks like the closest analogue.
Which emitter is the most accurate? It's all black with the different color top, but for asp it's either all black or all silver.
Redeemer Emitter 3 in standard finish is as close as you'll get.
So I get a covertec belt clip for backing, but there isn't a covertec on the saber?
Covertecs are a component at the base of every body (it comes with it). It doesn't show up on the builder (but it'll be there).
|
|
Wish List: Rebel, Count, Insurgent, Regal, Legacy 2.0
The following user(s) said Thank You: cetracey
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 4 days ago #15864
|
h2soy wrote:
Is it the 2015 model?
It'll be the ASP iteration of the 2015 model.
What pommel goes with it?
To my eyes the Jade looks like the closest analogue.
Which emitter is the most accurate? It's all black with the different color top, but for asp it's either all black or all silver.
Redeemer Emitter 3 in standard finish is as close as you'll get.
So I get a covertec belt clip for backing, but there isn't a covertec on the saber?
Covertecs are a component at the base of every body (it comes with it). It doesn't show up on the builder (but it'll be there).
Wow man, you aren't a Platinum member for nothing! Thanks so much for the detailed answers AND how fast it was! You're the man. Guess now I just have to decide whether or not to go with that, and then to either get a longer body or a different emitter (maybe one of the psudo thin necks ASP ones), since I'm a big guy and prefer sabers I can use two handed. |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 4 days ago #15865
|
This may be a question for Phil, but is it possible to put the covertech knob on the emitter a'la Phil's RGBA demo on youtube?
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 4 days ago #15866
|
This may be a question for Phil, but is it possible to put the covertech knob on the emitter a'la Phil's RGBA demo on youtube?
Yikes, that's definitely a question for someone on staff at SF. I would suggest you email your question to This email address is being protected from spambots. You need JavaScript enabled to view it.
where you're more likely to get it answered.
|
|
Wish List: Rebel, Count, Insurgent, Regal, Legacy 2.0
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 2 days ago #16051
|
I have a quick couple of questions now that i have filled in my ASP kickstarter survey. Sorry if these have been answered before
|
 Kickstarter ASP backer 1647 2 champ ASPs and a Bane. |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 2 days ago #16052
|
1 - No difference whatsoever. Same blades.
2 - They've said they're working on expanding options, but they haven't given specifics into WHAT yet... at least not that I have seen or heard. They also haven't really said when to expect it.. |
The following user(s) said Thank You: Artair
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 2 days ago #16080
|
New update.
The stretch goal Banes are in random finishes, and the stretch goal ASP parts are random. I get the logic, but still, this messes with my plans. https://www.kickstarter.com/projects/1621134222/adaptive-saber-parts-make-your-dream-lightsaber-a/posts/1310847 |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 1 day ago #16087
|
Does anyone know about reward of coupler?
I pledged $450, and got two complete hilts and coupler. Can I select coupler? Or SF select one? |
|
Own: Descent Hero RGBA
Luxeon converted Hasbro Darth Maul FX Ultrasabers Guardian Juggernaut warrior |
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 11 hours ago #16136
|
Will quick connect LEDs work with thin neck emitters?
|
ASP Kickstarter FAQs (Updated 7/9/15) 10 months 11 hours ago #16137
|
For ASP electronics kits everything is quick connects. As has been stated many times, the only reason quick connects are not compatible on current thin neck designs is because the led module is behind the emitter, so to take the led out you have to disassemble the saber, which would void the warranty. On ASP sabers, the whole point it to assemble your own saber.
TL;DR: Yes, on ASP sabers ONLY. |
|
|
ASP Kickstarter FAQs (Updated 7/9/15) 9 months 1 week ago #17824
|
So all asp sabers don't have recharge ports?
|
 |
ASP Kickstarter FAQs (Updated 7/9/15) 9 months 1 week ago #17825
|
Darth Secren wrote:
So all asp sabers don't have recharge ports?
Correct. The battery must be removed and charged separately. In-hilt chargers and LED AV switches will be added to the ASP system after it goes live, or soon thereafter. |
ASP Kickstarter FAQs (Updated 7/9/15) 9 months 1 week ago #17827
|
Thanks.It will be pretty cool to be able to change batt so easily.According to the kickstarter page,if you buy a whole LOT of stuff,you will get discounts...maybe like cosplay arts
|
|
|
ASP Kickstarter FAQs (Updated 7/9/15) 9 months 1 week ago #17836
|
Thanks.It will be pretty cool to be able to change batt so easily.According to the kickstarter page,if you buy a whole LOT of stuff,you will get discounts...maybe like cosplay arts
Those were the rewards for the Kickstarter backers; when ASP is live those sorta add-ons will be separate.
|
|
Wish List: Rebel, Count, Insurgent, Regal, Legacy 2.0
|
ASP Kickstarter FAQs (Updated 7/9/15) 8 months 4 weeks ago #18611
|
Will the ASP parts work with other brand soundboards and LEDs? I'm new to the saber hobby. I'm considering using ASP to learn how to put my own together with difference electronics.
|
|
"Only a Sith speaks in Absolutes"
|
