TOPIC: Wiring for crystal chamber.

Wiring for crystal chamber. 1 week 4 days ago #61186

Muns Online Premium Member Posts: 151 Thank you received: 71	Looking for help or preferably a diagram to help with wiring an accent LED for a crystal chamber on a lights aver I'm putting together. I've looked through most of the electronics forum pages and haven't had any luck. And all I've found on Google is FoC diagrams.
	The administrator has disabled public write access.

Wiring for crystal chamber. 1 week 4 days ago #61191

Elim Vos Offline Senior Member Posts: 51 Thank you received: 11	It will greatly depend on what sound board you are using. Plecterlabs always include that in the manual. Also, what type of LED are you using?
	"You cannot play God then wash your hands of the things you've created. The day will come when you can't hide from the things you have done anymore." The administrator has disabled public write access. The following user(s) said Thank You: =Ottomatix=

Wiring for crystal chamber. 1 week 2 days ago #61366

Muns Online Premium Member Posts: 151 Thank you received: 71	I'm most likely gonna use a spark 2 this time.
	The administrator has disabled public write access.

Wiring for crystal chamber. 1 week 2 days ago #61368

Jaden Korr Offline Platinum Member "Remember, [Force] abilities are not inherently good or evil; it's how you use them." --Kyle Katarn Posts: 855 Thank you received: 377	Muns wrote: I'm most likely gonna use a spark 2 this time. Then you'll be wiring it to the accent pads on the board (as shown on page 11 of the manual). You should be able to adjust the behavior of the accent LED. I've also seen people wire it to the main LED pads on other boards so it would match the flicker of the blade (with a pretty beefy resistor, or course).
	Forum FAQ 2005 MR Vader, Graflex 2.0, ASP hilt The administrator has disabled public write access. The following user(s) said Thank You: Muns

Wiring for crystal chamber. 1 week 2 days ago #61382

Muns Online Premium Member Posts: 151 Thank you received: 71	Thanks. I haven't used as spark 2 yet but they seem pretty solid. Gonna be installing it on this.
	Last Edit: 1 week 2 days ago by Muns. The administrator has disabled public write access. The following user(s) said Thank You: OvrcAHst

Wiring for crystal chamber. 1 week 2 days ago #61444

HotRod Offline Platinum Member Posts: 350 Thank you received: 170	That's awesome! Where did you come by that hilt if you don't mind me asking.
	- RGBA+ Monarch, FW Epoch, Juggernaut, Exhalted The administrator has disabled public write access.

Wiring for crystal chamber. 1 week 2 days ago #61456

Muns Online Premium Member Posts: 151 Thank you received: 71	HotRod wrote: That's awesome! Where did you come by that hilt if you don't mind me asking. It's actually one I found on etsy. This is just the stock picture, but it's on its way as we speak.
	The administrator has disabled public write access. The following user(s) said Thank You: HotRod

Wiring for crystal chamber. 1 week 2 days ago #61474

OvrcAHst
Offline
Moderator
War. Mostly Dark, Often Grey, Sometimes Light
Posts: 1527
Thank you received: 911

Muns,

Gonna be installing it on this.

That's a nice pickup. They're the 'modelled-after' empty Hilts by Thai Sabercraft on Etsy. Stumbled upon them the other night when I ventured further browsing on Etsy (as you do) initially from their Black ROTJ. If I had any considerable knowledge to or basic understanding for self electronic install I'd get one, but since I don't ...well, hope the install returns favourably for you.

The administrator has disabled public write access.

Forum

Saber DIY

Saber Electronics DIY

Wiring for crystal chamber.