|
Welcome, Guest
|
TOPIC: Nano Biscotte + 12w LED Problem!
Nano Biscotte + 12w LED Problem! 5 months 3 weeks ago #24935
|
I have attempted to wire a saberforge 12w LED to a Nano Biscotte V2 (using the PEX hack). When the LED is unplugged it works great, but when plugged in there is a large amount of static coming from the speaker. Sometimes the swing sounds will repeat over and over again. Does anyone have insight on this issue. Also, the resisters I am using for the LED are the ones saberforge have installed. Battery is 3.7v Panasonic 18650.
Here is a video demonstrating the issue: Pictures of the wiring have been attached.
Attachments:
|
Nano Biscotte + 12w LED Problem! 4 months 4 weeks ago #27257
|
Hello, Bit of a noob, so i gotta start from the top, did you solder with the SD card in? and do you have a ESD safe soldering iron? Maybe the PEX got overheated by the soldering iron? Just suggestions that I can give. Good Luck.
|
