|
Welcome, Guest
|
Welcome to the Saber Forge forum!
Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
TOPIC: New Member Introduction Thread
New Member Introduction Thread 4 days 3 hours ago #51276
|
As I said in your first thread, welcome! These Forums are pretty friendly, so you should definitely feel at home here.
Something to note as For Tyeth stated, your first 10 posts require approval by a mod before they'll appear. A small precaution against spambots, as we had quite the experience last year and earlier this year with those buggers. Also, check out the FAQ if you haven't already. As for artwork, that'd be something almost altogether new here! I believe the best place to post such material would be in the Fan Gallery Category of the Forums. We've seen the occasional art here, but it'd be nice to see someone actually doing such a thing consistently! Just drop your art there, and it'll be seen, trust me. Welcome again, and may the Force be with you! |
 Oracle, Fury, Avenger, Bane, Katana
The following user(s) said Thank You: latenightalaska
|
New Member Introduction Thread 4 days 3 hours ago #51277
|
Welcome to Delmont,
A bit of a short intro but you are welcome all the same! The saber duelling club sounds fun, sadly there is no such facility near me in my part of the galaxy. Hopefully you will have read some of the other Welcome messages here and will be aware of the FAQ's and Forum Rules. If you haven't seen them yet, they can be found using this link: FAQ's and Forum Rules Your first 10 posts will also need approval from the Moderators before being displayed. Again this is to help prevent unwanted Spam and Malware being posted. Your understanding in this matter is appreciated. I hope to read more of your messages and learn more about your Sabering adventures, For Tyeth |
 |
New Member Introduction Thread 4 days 3 hours ago #51282
|
Welcome latenightalaska!
I see you have been introduced to my good friend E64 (Eddlyss64), and he has given you the information to help you settle into the forum. You may be interested in looking up fellow members NeBosa and Seraphyn303, both of which are talented artists and there is the Fan Gallery section as mentioned. And as far as I have found on this site you don't need an excuse to get a new saber! I hope you enjoy your time here and hopefully our paths will cross and can have a chat, For Tyeth MTFBWY |
|
The following user(s) said Thank You: latenightalaska
|
New Member Introduction Thread 4 days 1 hour ago #51299
|
Hey Delmont, Hi Latenightalaska,
Welcome to the forum. We have a pretty extensive group with a lot of different backgrounds and expertise. Hope you both become long standing members! |
|
The following user(s) said Thank You: latenightalaska
|
New Member Introduction Thread 3 days 13 hours ago #51363
|
Hi Guys
My name is John and I have been a fan of Star Wars since the movie first released in 1977. Currently looking at building 3 hilts for my kids from SF apprentice empties. Then, something better for myself 
|
New Member Introduction Thread 3 days 7 hours ago #51371
|
Welcome John,
They have a pretty wide selection and pretty cool that you can share it with your kids. Best of luck with the Jedi family saber training. |
New Member Introduction Thread 3 days 5 hours ago #51388
|
Welcome, and what a great thing to do for your children (Padawans or Jawas? - My daughter is more of the former, my son the latter at the moment!)
Do have a play with the ASP builder program as it can be inspiring... |
|
Any idiot can squeeze a trigger....
It takes a special kind of idiot to use a saber. |
New Member Introduction Thread 2 days 23 hours ago #51411
|
Thanks. When does the ASP order ability go live to non-kick starters?
|
New Member Introduction Thread 2 days 23 hours ago #51416
|
Latest word we have is this.
They are aiming for the end of April to complete shipping of KickStarter, and IndeGoGo rewards. Once they have accomplished that, the intention was to launch the public availability of ASP. If they are successful in meeting those goals, there will be some really good things happening very soon. |
|
Imagine what you will know tomorrow....
|
New Member Introduction Thread 2 days 22 hours ago #51419
|
Brax wrote:
Latest word we have is this.
They are aiming for the end of April to complete shipping of KickStarter, and IndeGoGo rewards. Once they have accomplished that, the intention was to launch the public availability of ASP. If they are successful in meeting those goals, there will be some really good things happening very soon. I personally am counting on the ability to install the ASP electronics system into any Initiate sabers that I may get in the future. Sabers that I don't have the budget for right now but I'd love to get and use (such as the Guardian or the Juggernaut), but I want to buy my signature sabers first, and those two together cost around $750. |
|
Oracle, Fury, Avenger, Bane, Katana |
New Member Introduction Thread 2 days 22 hours ago #51424
|
Hi everyone, Kyle from New Jersey here
|
|
-Kyle
|
New Member Introduction Thread 2 days 21 hours ago #51429
|
Hello, i am also new to the forum. just ordered my first saber and i have absolutely no buyer's remorse.
|
|
"I AM THE HYPE"
|
New Member Introduction Thread 2 days 20 hours ago #51433
|
Darth Advent wrote:
Hello, i am also new to the forum. just ordered my first saber and i have absolutely no buyer's remorse.
Welcome Darth Advent, what saber did you purchase?
|
New Member Introduction Thread 2 days 20 hours ago #51434
|
Welcome folks!
Be sure to take a glance at the FAQ, and the Forum Rules, and know that until your post count reaches 10, they have to be individually approved (by yours truly). This was a measure put in place to discourage SPAM accounts from flooding our forums. |
|
Imagine what you will know tomorrow....
|
New Member Introduction Thread 2 days 18 hours ago #51440
|
What going on, I'm Ryan. Just got into the hobby because I'm passing on the love of Star Wars to my kids.
|
New Member Introduction Thread 2 days 13 hours ago #51449
|
Greetings Ryan,
no better gift to pass on than that imo. Any plans to purchase a saber for you or your younglings? Check out the FAQ's for helpful info on posting do's and don'ts xyster |
 |
New Member Introduction Thread 2 days 13 hours ago #51451
|
Welcome bldeknght7 (Kyle), Darth Advent, and Ded4thragnda (Ryan).
Passing on the love is a great way to have fun as well. My son loves the Star Wars Lego, but finds Darth Maul scary! |
|
Any idiot can squeeze a trigger....
It takes a special kind of idiot to use a saber. |
New Member Introduction Thread 2 days 8 hours ago #51475
|
Welcome everyone!
To Cort (John), bldeknght7 (Kyle), Darth Advent and last but not least Ded4thragnda (Ryan) apologies my welcome is a little late but real life business interrupted my usual service! Thankfully my fellow members, Brax, GaleForceEight and =Ottomatix=, Eddlyss64, Xyster and Ramaloke have extended a warm greeting to you all. I hope all of you enjoy your time here and hopefully I won't be so busy and will get a chance to chat with each of you when our paths cross, kind regards, For Tyeth |
|
|
New Member Introduction Thread 2 days 8 hours ago #51477
|
Hi Everyone,
i'm Alex from germany. Last year in december i stumbled upon the ASP campaign on IGG and ordered the 2x ASP Saber LED Blade Sound perk for me and my brother since i thought it would be an awesome present for his 25th birthday in may. and now i'm sitting here, waiting like everyone else. (already checked gcnywaldork's spreadsheet, i'm at position 800+ on IGG) |
|
New Member Introduction Thread 2 days 5 hours ago #51487
|
Welcome Alimad!
Thanks for letting us know you've joined. You will find this forum full of friendly, helpful folk who will be glad to chat with you. There are a lot of members who are very interested in the ASP campaign, as you will know from looking through the forum and studying gcnywaldork's innovative spreadsheet! Having checked the spreadsheet I hope you will take a little time to check out the FAQ's and Forum Rules Pages, they too are a great read and will just give you some extra information to help you settle in here. A link to those pages is here: FAQ's and Forum Rules One more piece of information I need to give is that as a New Member your first 10 posts will need to be approved by the site's Moderators before being displayed. This is to help prevent unwanted Spam and Malware getting onto the forum. The Mods will process your messages as quickly as possible. After this initial period you will then have full instant access to the forum and can post freely. I look forward to reading more of your posts in the future, For Tyeth P.S. To Brax, you appear to have fixed the glitch with this thread already, Thank you! |
|
|
Moderators: Brax