|
Welcome, Guest
|
TOPIC: MPP MKII Is Up For Pre-Order!
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77425
|
MKII is in the Legacy Sabers section (unlike MK1 which is in the Crystal Chamber section) as at the time of this post:
https://saberforge.com/collections/legacy-sabers/products/mpp-mkii If you are interested in MPP MK1, then you can still pre-order it: https://saberforge.com/collections/crystal-sabers/products/mpp-mk1 |
|
|
Saberforge lightsabers are cool
 https://www.youtube.com/channel/UCEma1xhFlAneJcgIrT6nJtg |
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77426
|
I believe it will be moved to the Crystal Reveal section. I asked Phil if they were supposed to be in separate areas, and he indicated that was not the way it was intended. So, if you go to the Legacy section, and don't see it, try the Crystal Reveal, and it should be there.
|
|
Imagine what you will know tomorrow....
|
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77427
|
Yep, MKII is now moved to the Crystal Chamber section to meet up with MK1.
|
|
|
Saberforge lightsabers are cool
https://www.youtube.com/channel/UCEma1xhFlAneJcgIrT6nJtg |
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77428
|
Interesting that small differences can make each one look "different enough" from one another. I like the external red and white wires seen in MKII.
|
|
|
Saberforge lightsabers are cool
https://www.youtube.com/channel/UCEma1xhFlAneJcgIrT6nJtg |
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77430
|
Subtle, but noticeable! I love them both!
|
|
Imagine what you will know tomorrow....
|
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77431
|
I love the look of both of these sabers!....in the end i went with the Mk1 cause i like the switch section better......I wonder if the lighted crystal reveal will shine through the exhaust ports on the Mk1....
|
 |
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77444
|
DK44 wrote:
I love the look of both of these sabers!....in the end i went with the Mk1 cause i like the switch section better......I wonder if the lighted crystal reveal will shine through the exhaust ports on the Mk1....
My buddy is going for the MKII (he likes the external red/white wires). So I might be able to borrow it for a comparison video with the MK1 (mine). Come on folks, place your pre-orders so we can hit the 100! |
|
|
Saberforge lightsabers are cool
https://www.youtube.com/channel/UCEma1xhFlAneJcgIrT6nJtg |
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77448
|
If I didn't have so much other stuff in the works right now, I'd be so down for a MkII. Love the ESB Vader hilt.
|
|
The following user(s) said Thank You: Execute66
|
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77453
|
You definitely have to do that video E!
|
|
The following user(s) said Thank You: Execute66
|
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77458
|
Welp, time to start emptying the coffers again!
For the less experience buyer, other than small things like the red and white wire, are there any major differences between the MkI and MkII? |
|
Trust me on everything, quote me on nothing
|
MPP MKII Is Up For Pre-Order! 8 months 1 week ago #77459
|
evo454 wrote:
For the less experience buyer, other than small things like the red and white wire, are there any major differences between the MkI and MkII?
MKI: A New Hope MKII: The Empire Strikes Back The differences are subtle. Aside from the wires, the clamps are slightly different and the T-tracks (grips) are slightly longer on the TESB version. I don't remember if there was anything else different in the props. |
|
The following user(s) said Thank You: evo454
|
MPP MKII Is Up For Pre-Order! 8 months 6 days ago #77462
|
Full list of differences, from the Rebelscum Forums:
Doesn't look like 3 and 7 made it into these.
1. The ANH has shorter grips - they are 3.625" each, leaving some space between the end of the grips and the clamp. The ESB Grips, 4.5" on the MR, go all the way to the clamp.
2. The ESB has wires connecting the ports near the emitter - one thick red one on top, and a black/while (some look brown) in the lower port. The ANH doesn't have this. 3. The clamp on the ESB is at 6:00, looking into the emitter right-side up. The ANH clamp is at 5:00 from the same point of view. 4. The clamp sidebars on the ANH are silver - the ESB sidebars are black. 5. The ANH clamp locks with a level like graflex clamps do. The ESB has a nut instead. 6. The ESB has 6 grips, the ANH has 7. Because the variation in number, they are positoned differently. 7. The grips on the ESB have straight ends. The ANH grips have rounded ends. |
|
The following user(s) said Thank You: scifidude79
|
MPP MKII Is Up For Pre-Order! 8 months 4 days ago #77593
|
I love the ESB Vader, but damn... right now I don't have the money for it, so here's just hoping I'll still be able to pre-order at the end of the month or so, but I'm having fears it might be hard.
 Have to go for an empty hilt anyway then, anything up to Warrior, Champion or Hero would become too expensive; that and the fact that I would like to have a SaberSmith do a good LED colour on it as well as some awesome fonts (MPP from JuanSith, Rogue Vader from LordBlako, etc.) The Prodigal Son crystal reveal has always been on my wishlist for getting a 'movie lightsaber', but I figured I could wait with getting the prop ones for later - so far all my others are either Expanded Universe/Legends or just own ASP design. But this MPP MKII is actually making me go; I need it now! |
|
For my ally is the Force - and a powerful ally it is!
|
MPP MKII Is Up For Pre-Order! 8 months 4 days ago #77610
|
CrimsonJax88 wrote:
I love the ESB Vader, but damn... right now I don't have the money for it, so here's just hoping I'll still be able to pre-order at the end of the month or so, but I'm having fears it might be hard.
Have to go for an empty hilt anyway then, anything up to Warrior, Champion or Hero would become too expensive; that and the fact that I would like to have a SaberSmith do a good LED colour on it as well as some awesome fonts (MPP from JuanSith, Rogue Vader from LordBlako, etc.) The Prodigal Son crystal reveal has always been on my wishlist for getting a 'movie lightsaber', but I figured I could wait with getting the prop ones for later - so far all my others are either Expanded Universe/Legends or just own ASP design. But this MPP MKII is actually making me go; I need it now! You have time, both versions are still available. It might take a while longer before they each hit 100 pre-orders to fulfill the production requirements.
|
|
|
Saberforge lightsabers are cool
https://www.youtube.com/channel/UCEma1xhFlAneJcgIrT6nJtg |
MPP MKII Is Up For Pre-Order! 8 months 3 days ago #77616
|
I ordered the MK1, initiate tier. I'll be sending it to a saber smith for a full custom intall. Vader's ANH lightsaber is my favorite lightsaber
Can't wait! |
|
The following user(s) said Thank You: Execute66
|
MPP MKII Is Up For Pre-Order! 8 months 2 days ago #77627
|
I'm just sayin', y'all need to put those pre-orders in so I can get my MKII.
|
|
This is not the post you're looking for...
|
MPP MKII Is Up For Pre-Order! 8 months 2 days ago #77675
|
I saw this at Walmart of all places. Was so tempted to get it.
It would go great above an MPP |
|
"The ability to speak does not make you intelligent."
"Do you hear that? That is the sound of a thousand terrible things headed this way."
The following user(s) said Thank You: Execute66
|
