Welcome, Guest
Username: Password: Remember me
Threaded Indented

TOPIC: Upcoming SaberForge Releases

Upcoming SaberForge Releases 4 months 1 week ago #34073

  • Goon
  • Goon's Avatar
  • Offline
  • Junior Member
  • Posts: 36
  • Thank you received: 4
Whoops did I break rule #3? I just wanted some estimations from other users
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #34074

  • For Tyeth
  • For Tyeth's Avatar
  • Offline
  • Platinum Member
  • Posts: 1644
  • Thank you received: 634
Hi Goon,

No don't worry, sorry to scare you. In this section folks usually talk about upcoming saber models and products that have been announced.
There is talk of a new Soundboard (the electronics components) being developed but as far as I know, the V4 Infinity Edge Blade is the best you can get.
More people look through the Open Topics section in general so you will have a better chance of getting a reply to this question there.

I hope this helps and apologies again!

For Tyeth
Last Edit: 4 months 1 week ago by For Tyeth. Reason: old laptop missed a word out!
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #34076

  • Goon
  • Goon's Avatar
  • Offline
  • Junior Member
  • Posts: 36
  • Thank you received: 4
Its ok thanks for your guidance. I just posted a new thread on the open topics section
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #34103

  • Dr. Anthropologist
  • Dr. Anthropologist's Avatar
  • Offline
  • Premium Member
  • Hope is not lost today. It is found
  • Posts: 140
  • Thank you received: 32
For Tyeth is the hero we all deserve. His commitments to guiding new members will never go unnoticed. ;)
"You can do this. Within you is the heart of a champion"
The administrator has disabled public write access.
The following user(s) said Thank You: Octavarium, For Tyeth, Thorngren

Upcoming SaberForge Releases 4 months 1 week ago #34650

  • DarthTtocs
  • DarthTtocs's Avatar
  • Offline
  • Premium Member
  • Posts: 84
  • Thank you received: 10
Man, Im looking at those sabers and that Renegade looks really sweet.
The wounded Jedi looks up at the massive man wielding a 6' long light saber! The last words the Jedi hears is "Yes, I am Sith"
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #34671

  • Drahem
  • Drahem's Avatar
  • Offline
  • Premium Member
  • Posts: 90
  • Thank you received: 22
Yea, I'm looking at the renegade and regal.. Maybe a regal pike. If and when they release.
I own, Relic, Archons x2. Bane x2.
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #35162

  • Brax
  • Brax's Avatar
  • Online
  • Administrator
  • Posts: 1990
  • Thank you received: 616
New Apprentice Saber #4: The Bastion




Imagine what you will know tomorrow....
Last Edit: 4 months 1 week ago by Brax.
The administrator has disabled public write access.
The following user(s) said Thank You: RyanRising

Upcoming SaberForge Releases 4 months 1 week ago #35167

  • Eddlyss64
  • Eddlyss64's Avatar
  • Offline
  • Platinum Member
  • "Either in belief or doubt, if I lean to one of these sides, my reaction time will be dulled if my heart thinks the opposite of what I choose."
  • Posts: 674
  • Thank you received: 167
Brax wrote:
New Apprentice Saber #4: The Bastion





GAH! I want to see the beauty but the image quality isn't high enough!


Oracle, Fury, Avenger, Bane, Katana
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #35169

  • RyanRising
  • RyanRising's Avatar
  • Offline
  • Platinum Member
  • *Inspirational Star Wars Quote*
  • Posts: 508
  • Thank you received: 136
Okay, so it's blue and has fancy windows... Gradually getting to know it, I guess. Soon™.


Also, I originally came here to say I really like the Vanguard, but it's a shame we'll have to wait until fall.

EDIT: BY THE FORCE! The Apprentice sabers are now in the review section!
The above post may be subject to editing. A lot of editing.
Last Edit: 4 months 1 week ago by RyanRising.
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 1 week ago #35171

  • OvrcAHst
  • OvrcAHst's Avatar
  • Offline
  • Moderator
  • Grey - it is OvrcAHst.
  • Posts: 1269
  • Thank you received: 711
GAH! I want to see the beauty but the image quality isn't high enough!

@Eddlyss64: Check-out the Review under Apprentice Tab Posted by Knytiri. Up-close and personal!
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 6 days ago #35535

  • Darth Servius
  • Darth Servius's Avatar
  • Offline
  • Junior Member
  • Posts: 21
  • Thank you received: 7
I just have to say The Regal sort of reminds me of Lucien Draay's lightsaber from the Knights of the Old Republic comic.
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 6 days ago #35571

  • tfaust
  • tfaust's Avatar
  • Offline
  • New Member
  • Posts: 5
  • Thank you received: 1
ok, I am really confused by this thread in general. can someone help me out? when are these sabers even releasing? this thread seems pretty old, and I have never seen any of these designs on the sight. also, designs that I have seen on youtube such as bane and mauler are nowhere to be seen, yet the reviews of them have only been out for less than a year.
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 6 days ago #35573

  • Snakeeyz99
  • Snakeeyz99's Avatar
  • Offline
  • Elite Member
  • Posts: 316
  • Thank you received: 92
tfaust wrote:
ok, I am really confused by this thread in general. can someone help me out? when are these sabers even releasing? this thread seems pretty old, and I have never seen any of these designs on the sight. also, designs that I have seen on youtube such as bane and mauler are nowhere to be seen, yet the reviews of them have only been out for less than a year.

These are mostly concept sabers that SF plans to release in the future. With all the current expansions we shouldn't expect to see many of them until later in the year.

In terms of other sabers, like the Bane, Mauler, Ka'Tano etc are still in their Etsy pre-release phases or are between phases:
Some of these saber models will immediately be added to the website as part of SaberForge's permanent lineup, these will be "standard releases." However, most of these designs will be "prereleases" limited to a starting quantity of 100 and available for preorder exclusively via the SaberForge Etsy Shop. If a saber design does well during the prerelease run, SaberForge will add the design to their website several months later. If a design proves unpopular during the prerelease, then they will discontinue that design, retiring it into the SaberForge Vault, perhaps to be brought out again in the future with some modifications as limited runs for special occasions.

For now, if you want to get one of those sabers, you need to wait until they restock the pre-release on Etsy or need to wait until they are eventually added to the main site. Some like the Mauler will be available through the ASP modular hilt system that launches early this year.
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 6 days ago #35575

  • tfaust
  • tfaust's Avatar
  • Offline
  • New Member
  • Posts: 5
  • Thank you received: 1
Snakeeyz99 wrote:
tfaust wrote:
ok, I am really confused by this thread in general. can someone help me out? when are these sabers even releasing? this thread seems pretty old, and I have never seen any of these designs on the sight. also, designs that I have seen on youtube such as bane and mauler are nowhere to be seen, yet the reviews of them have only been out for less than a year.

These are mostly concept sabers that SF plans to release in the future. With all the current expansions we shouldn't expect to see many of them until later in the year.

In terms of other sabers, like the Bane, Mauler, Ka'Tano etc are still in their Etsy pre-release phases or are between phases:
Some of these saber models will immediately be added to the website as part of SaberForge's permanent lineup, these will be "standard releases." However, most of these designs will be "prereleases" limited to a starting quantity of 100 and available for preorder exclusively via the SaberForge Etsy Shop. If a saber design does well during the prerelease run, SaberForge will add the design to their website several months later. If a design proves unpopular during the prerelease, then they will discontinue that design, retiring it into the SaberForge Vault, perhaps to be brought out again in the future with some modifications as limited runs for special occasions.

For now, if you want to get one of those sabers, you need to wait until they restock the pre-release on Etsy or need to wait until they are eventually added to the main site. Some like the Mauler will be available through the ASP modular hilt system that launches early this year.


Ok, thanks. So is there any way to tell when these designs will be added? Or will I just have to keep refreshing this forum/their main site?
The administrator has disabled public write access.

Upcoming SaberForge Releases 4 months 6 days ago #35577

  • Snakeeyz99
  • Snakeeyz99's Avatar
  • Offline
  • Elite Member
  • Posts: 316
  • Thank you received: 92
For now, the best way to keep up with things is to follow the Facebook and Twitter pages and check in with the forums. SF is working on a website redesign that will hopefully consolidate all of the information in the future, so that's the best we can do at the moment.
The administrator has disabled public write access.
The following user(s) said Thank You: DarthTtocs

Upcoming SaberForge Releases 4 months 4 days ago #38666

  • Darth_ludacris
  • Darth_ludacris's Avatar
  • Offline
  • Premium Member
  • Posts: 84
  • Thank you received: 8
is there a date when the ones like the ventress saber will have an official release date
The administrator has disabled public write access.

Upcoming SaberForge Releases 3 months 4 weeks ago #39783

  • LeKeepers
  • LeKeepers's Avatar
  • Offline
  • New Member
  • Mace Saber !?!
  • Posts: 1
  • Thank you received: 1
Do you going make Windu Inspired ?





Legacy 2.0 Estimation date ?

Best regards !
Sorry for my english, i'm from France =)
The administrator has disabled public write access.
The following user(s) said Thank You: Jedi71

Upcoming SaberForge Releases 3 months 2 weeks ago #41148

  • Froboy696
  • Froboy696's Avatar
  • Offline
  • Premium Member
  • Posts: 108
  • Thank you received: 7
So any update on those 3 new saber hilts? I really want to get the oracle hilt and I've been holding back on buying another hilt for this one.
The administrator has disabled public write access.

Upcoming SaberForge Releases 3 months 2 weeks ago #41393

  • h2soy
  • h2soy's Avatar
  • Offline
  • Moderator
  • Curio Collector
  • Posts: 1211
  • Thank you received: 250
Do you going make Windu Inspired ?
There was chatter about a Windu ASP expansion but it's been quiet awhile.
Legacy 2.0 Estimation date ?
No additional info yet.
So any update on those 3 new saber hilts?
Not yet. Supposedly VERY soon.
Wish List: Rebel, Count, Insurgent, Regal, Legacy 2.0
The administrator has disabled public write access.

Upcoming SaberForge Releases 3 months 2 weeks ago #41466

  • MusicallyInspired
  • MusicallyInspired's Avatar
  • Offline
  • Elite Member
  • Posts: 290
  • Thank you received: 61
4 new saber hilts.
The administrator has disabled public write access.
Threaded Indented

Member Login

Latest Posts

    • Wiring in Parallel (4 Posts)
    • I honestly wouldn't mind. I've had a lot of fun learning about the stuff so far, but I don't know...
    • Request For ASP To Ship A... (22 Posts)
    • ^ Agree entirely. Welcome to the Forum too! I think $15 or $20 would more than cover the cost of...
    • Wiring in Parallel (4 Posts)
    • He doesn't because the two amber dies need resistors but not the white one. Plus I've been told it's...
    • Wiring in Parallel (4 Posts)
    • It *can* be done by bridging connections, but it's not really needed. Parallel, as far as LEDs go,...
    • Any one know if Saberforg... (16 Posts)
    • Nice, that's not all that bad to be honest. Your saber can finally join the others with their 12Ws...

More Topics »

Forum Statistics

  • Total Users: 4234
  • Latest Member: cpted
  • Total Posts: 42.9k
  • Total Topics: 3120
  • Total Sections: 20
  • Total Categories: 101
  • Today Open: 2
  • Yesterday Open: 9
  • Today Answer: 65
  • Yesterday Answer: 132