Indigo vs Purple Lightsaber: How to Tell the Colors Apart
Indigo is a deep blue violet, violet sits between indigo and purple, and purple is a mix of red and blue light. On a saber, indigo means mostly blue with a little red, purple means red and blue closer to equal. A pixel blade can only imitate indigo, while an in-hilt royal blue LED gets closest to the real wavelength.
Short answer
Indigo is a deep blue violet, violet sits between indigo and purple, and purple is a mix of red and blue light. On a saber, indigo means mostly blue with a little red, purple means red and blue closer to equal. A pixel blade can only imitate indigo, while an in-hilt royal blue LED gets closest to the real wavelength.

On this page9 sections
Indigo is a deep blue violet, purple is a mix of red and blue, and violet sits between them. On a lightsaber that comes down to how much red is added to the blue: an indigo blade is mostly blue with a touch of red, a purple blade has the two much closer to equal. There is no canon standard for any of the three names, so sellers use them loosely. This page explains the difference, the RGB values people use, why blades change on camera, which LED setups reach a true indigo and how to check a saber before you buy. Last checked 18 November 2026.
For who carries a purple blade in the films and books, read the purple lightsaber guide. For every color at once, see the lightsaber colors overview.
Quick answer
What the three words mean
Indigo and violet are spectral colors: each matches a single wavelength of light. Wikipedia places spectral violet at about 380 to 435 nm [2]. For indigo it gives about 420 to 450 nm in modern sources, notes that some put it at 445 to 464 nm, and says some color scientists do not name an indigo band at all [1]. Isaac Asimov, quoted in the same article, thought indigo looked like nothing more than deep blue [1].
Purple is different. It is not in the spectrum. It is a mix of red and blue light that the eye reads as one color [2]. That matters for sabers, because a mix is easy to make with red and blue LEDs, while a true short wavelength needs an LED that emits there.
In practice:
- Indigo: deep blue that leans violet. Little or no visible red.
- Violet: blue violet, brighter and more saturated than indigo.
- Purple: an even red and blue mix, the “amethyst” tone the official Databank uses for Mace Windu’s blade [9].
- Magenta: purple pushed toward pink.
RGB values commonly used
On a pixel blade or a ProffieOS board, a color is three numbers for red, green and blue, from 0 to 255 [6]. The values below are the standard web and reference colors that show up in configs and product pages.
| Name | Hex | RGB | What it looks like on a blade |
|---|---|---|---|
| Electric indigo | #6F00FF | 111, 0, 255 | Close to spectral indigo on screen, about 435 nm [1] |
| Violet (reference) | #8000FF | 128, 0, 255 | Blue violet, a little more red than indigo [2] |
| Blue violet (CSS) | #8A2BE2 | 138, 43, 226 | Softer violet with some green [3] |
| Dark violet (CSS) | #9400D3 | 148, 0, 211 | Deep purple violet [3] |
| Web “indigo” (CSS) | #4B0082 | 75, 0, 130 | A dark purple despite the name [1][3] |
| Purple (CSS) | #800080 | 128, 0, 128 | Even red and blue, true purple [3] |
| Magenta (CSS) | #FF00FF | 255, 0, 255 | Pink purple at full power [3] |
Two traps sit in that table. The CSS color called indigo is a dark purple, named in the 1980s X11 color list, not a spectral indigo [1]. And CSS “violet” (#EE82EE) is a pale orchid pink [3], nothing like a violet blade. If a config or a seller quotes a color name, ask for the numbers.
The working rule, from our arithmetic on the table: indigo keeps red at about 40 to 45 percent of blue, violet at about 50 percent, purple at 100 percent. Brightness changes the look as well, so treat these as starting points to adjust by eye.
Why the room and the camera disagree
Indigo is the hardest of the three to judge from a photo. The eye is least sensitive at the blue and violet end. Sensitivity peaks at 555 nm and falls off toward 450 nm and below, for cameras as well as eyes [8]. So an indigo blade looks dimmer in the room than a purple one at the same power, because purple borrows brightness from its red.
Cameras add their own error. Many clip the blue channel early when a bright blue source sits in a dim scene [7]. A clipped indigo blade turns into a flat blue or a washed purple on video. The blade color guide covers the same effect for blue blades and how to set exposure by hand.
So a blade that reads indigo in a dark room can look blue in a phone video, and a purple blade can look pink. Judge by eye in the room you will use it in.
Which LED setups hit a true indigo
Pixel blades
A pixel blade, often sold as Neopixel, uses strips of small RGB LEDs. On the WS2812B datasheet the blue chip emits at 465 to 467 nm and the red at 620 to 625 nm [4]. Neither is in the indigo band, so a pixel blade imitates indigo by adding a little red to blue. It can look right to the eye, and you can tune it in software, but no setting reaches the real wavelength.
Pixel blades have one more problem with indigo. Adafruit notes that on long runs with too little power, the far pixels turn brownish, because the blue and green emitters need more voltage than the red [5]. On an indigo blade, losing blue pushes the tip toward purple (our inference). A well built blade with good power avoids it. The Neopixel guide explains how these blades are wired.
In-hilt RGB LEDs
A basic in-hilt RGB saber mixes fixed channels. Ultrasabers, for example, lists red plus blue on its RGB sabers as looking light violet [10]. With no control over the red level, you get one violet or purple mix, not a choice of indigo.
Royal blue LEDs
An in-hilt royal blue emitter comes closest to real indigo. Lumileds lists royal blue at a 440 to 460 nm peak [11], which overlaps the indigo band in the sources above [1]. On its own it reads as a deep blue with a violet edge. A multi-die LED star with royal blue plus a dimmed red die, on a board that drives each die separately, is the closest you can get to a true indigo on a saber, in our reading of the data.
How to test before buying
- Ask for a video in a dark room with the camera locked to manual exposure, so the blue does not clip [7].
- Ask to see indigo and purple side by side on the same blade. The difference is easier to see together.
- Check the tip of a pixel blade. A tip that turns pinker than the base points to a power problem [5].
- On a pixel or Proffie saber, ask whether you can edit the color values [6]. Then a wrong shade is a settings change, not a return.
- Read the return policy before ordering, since color is a matter of taste. Our warranty and returns guide compares makers.
Which characters use which shade
No canon source gives an RGB value for any blade, so the matches below are approximate.
- Mace Windu, canon: purple, described as amethyst [9]. Medium purple, not indigo. See the Mace Windu lightsaber page.
- Vernestra Rwoh, canon, and Mara Jade, Legends: purple. Both are covered on the purple lightsaber page.
- Darth Revan, Legends: Wookieepedia lists a violet blade on his later hilt [12]. Closer to violet than to indigo. See the Darth Revan lightsaber page.
- Cal Kestis, in the game Jedi: Fallen Order: indigo, purple and magenta are separate blade colors you can unlock [13]. It is the clearest official case of indigo and purple being treated as different colors. See Cal Kestis’s lightsaber.
- Plo Koon: one retailer imagines an indigo blade for him and flags it as hypothetical [14]. It is not canon, as the Plo Koon lightsaber page explains.
If you mostly want a deep blue, an indigo setting is a variation on the blue lightsaber.
Sources
- Wikipedia, Indigo (color), https://en.wikipedia.org/wiki/Indigo_(color) (accessed 2026-11-18)
- Wikipedia, Violet (color), https://en.wikipedia.org/wiki/Violet_(color) (accessed 2026-11-18)
- W3C, CSS Color Module Level 4, named colors, https://www.w3.org/TR/css-color-4/ (accessed 2026-11-18)
- Worldsemi, WS2812B datasheet (hosted by Adafruit), https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf (accessed 2026-11-18)
- Adafruit, Powering NeoPixels (NeoPixel Uberguide), https://learn.adafruit.com/adafruit-neopixel-uberguide/powering-neopixels (accessed 2026-11-18)
- ProffieOS Documentation, Blade Styles, https://pod.hubbe.net/config/styles/blade-styles.html (accessed 2026-11-18)
- Fstoppers, Blue Clipping: A Problem You Probably Never Knew Existed in Low-Budget Cameras, https://fstoppers.com/opinion/blue-clipping-problem-you-probably-never-knew-existed-low-budget-cameras-325594 (accessed 2026-11-06)
- Wikipedia, Luminous efficiency function, https://en.wikipedia.org/wiki/Luminous_efficiency_function (accessed 2026-11-18)
- Star Wars Databank, Mace Windu, https://www.starwars.com/databank/mace-windu (accessed 2026-11-18)
- Ultrasabers, FAQ, https://ultrasabers.com/faq/ (accessed 2026-11-18)
- Lumileds, LUXEON Rebel Color Line datasheet DS68, https://www.luxeonstar.com/wp-content/uploads/documentation/ds68.pdf (accessed 2026-11-06)
- Wookieepedia, Redeemed Revan’s Lightsaber, https://starwars.fandom.com/wiki/Redeemed_Revan%27s_Lightsaber (read through the Fandom API, accessed 2026-11-18)
- PC Gamer, Here are all the Jedi: Fallen Order lightsaber colors, https://www.pcgamer.com/all-jedi-fallen-order-lightsaber-colors-indigo-magenta-cyan-purple/ (accessed 2026-11-18)
- nsabers, Plo Koon’s indigo lightsaber (retailer article), https://nsabers.com/blogs/lightsabers-guide/plo-koons-indigo-lightsaber-mysticism-deep-insight-and-force-wisdom (accessed 2026-11-11)
FAQ
What is the difference between indigo and purple on a lightsaber?
Indigo is mostly blue with a little red and looks deep blue violet. Purple mixes red and blue more evenly [1][2].
What RGB value is indigo?
Electric indigo is 111, 0, 255, close to spectral indigo on screen. The CSS color named indigo, 75, 0, 130, is a dark purple [1][3].
Is violet the same as indigo?
No. Violet is the shorter wavelength, about 380 to 435 nm, and indigo sits between it and blue [1][2].
Why does my indigo blade look blue in videos?
Cameras clip the blue channel in bright blue light, and the eye and camera are least sensitive at that end of the spectrum [7][8].
Can a Neopixel blade show true indigo?
It can imitate it by mixing blue with a little red, but its blue chip emits at 465 to 467 nm, outside the indigo band [4].
Who has an indigo lightsaber?
No film character has a canon indigo blade. Jedi: Fallen Order offers indigo as a blade color [13].
Editorial team
Writes for Saber Atlas. Every guide is checked against the maker's specs and dated, so you know how fresh it is.
Want a saber like this?
- Lightsaber Replica Guide: Licensed, Custom and Realistic: Licensed and fan replicas of film sabers, and what each price level gets you.
- Custom Lightsaber: Options, Lead Times and What to Check: Order a hilt and blade colour built to your own design.
- Best Lightsaber to Buy in 2026: Picks by Use and Budget: Our picks by budget if you just want a good saber to own.
Read next
Purple Lightsaber: Mace Windu, Mara Jade and Vernestra Rwoh
The purple lightsaber is best known from Mace Windu, whose blade was an actor's request. Canon also has Vernestra Rwoh, whose purple saber can switch to a lightwhip. Mara Jade's purple saber belongs to Legends. Purple has no official meaning, only fan readings.
Lightsaber Colors and What They Mean: Canon vs Legends
Lightsaber colors come from the kyber crystal inside the hilt. Blue and green are the common Jedi colors, red marks a corrupted crystal, and purple, yellow, white, orange and black are rarer. In canon, color has no fixed rule. Most 'meanings' come from Legends or fans.
How to Choose a Lightsaber Blade Color: LED and Pixel Guide
Pick a blade color by wavelength and brightness, not by name. Lime and green LEDs give the most light, blue and deep red give the least, and cameras exaggerate blue. Pixel blades set color in software. In-hilt LEDs fix it in the emitter. Watts claimed on a listing say little.
Neopixel Lightsaber: What It Is and Which One to Buy
A neopixel lightsaber has an LED strip inside the blade, so the glow is even from hilt to tip and the blade can animate. Entry models start around $180, mid-range around $250 to $400, Proffie sabers from about $400. Duelling needs a tougher blade.
Mace Windu's Lightsaber: Appearances, Design and Fate
Mace Windu's lightsaber is a single purple blade on a straight electrum-plated hilt, carried from Geonosis through the Clone Wars until it fell from Palpatine's window. This reference covers the character, the film and series appearances, the hilt design, the one saber or two question, and canon against Legends.
Darth Revan's Lightsaber: Colors, Hilts and Canon vs Legends
Darth Revan's lightsaber has no single color. Revan is a Legends character from Knights of the Old Republic, and the blade is red as a Sith Lord, violet or blue as a Jedi, depending on the source. This reference covers the two named hilts, the color changes, the single canon mention, and how to build a Revan style saber.
Cal Kestis' Lightsaber: Sabers, Stances and Canon Facts
Cal Kestis' lightsaber is a blue, modular saber he rebuilt on Ilum in Star Wars Jedi: Fallen Order. It works as a single blade, a double-bladed staff or two split sabers, and gains a crossguard mode in Survivor. This reference covers each saber he carried, the game stances, canon status and licensed hilts.
Blue Lightsaber: Who Wields One and What Blue Means
Blue is the standard Jedi lightsaber color. In canon it belongs to Obi-Wan Kenobi, Anakin Skywalker, Luke in A New Hope, Kanan Jarrus, Ezra Bridger, Cal Kestis and Sol. The crystal sets the color, not a rank. Blue as the Guardian color is a game-era idea, not a canon rule.