SmoothSwing Explained: How Swing Sound Really Works
SmoothSwing is a swing sound method designed by a hobbyist known as Thexter. Instead of playing a whoosh clip when you swing, the board blends a pair of extra hum files with the main hum as the hilt rotates, so the sound follows your motion. Proffieboard, CFX and Golden Harvest v4 document it, Xenopixel sabers list their own version, and the font needs swing pair files.
Short answer
SmoothSwing is a swing sound method designed by a hobbyist known as Thexter. Instead of playing a whoosh clip when you swing, the board blends a pair of extra hum files with the main hum as the hilt rotates, so the sound follows your motion. Proffieboard, CFX and Golden Harvest v4 document it, Xenopixel sabers list their own version, and the font needs swing pair files.

On this page8 sections
SmoothSwing is a way of making lightsaber swing sound follow your arm. Older boards play a separate swing clip when the motion sensor crosses a threshold. A SmoothSwing board instead plays two extra hum files alongside the main hum and changes their volume as the hilt rotates, so a slow turn gives a low swell and a fast spin rises and falls in pitch [1][2]. The method was designed by a hobbyist known as Thexter, and both the ProffieOS documentation and Plecter Labs’ CFX manual credit him [1][2].
Proffieboard, CFX and Golden Harvest v4 document how they do it [1][2][3]. Xenopixel sabers are sold with “smooth swing” listed as a feature, but we found no technical description of how Xeno does it [5]. A font only uses SmoothSwing if it contains the swing pair files.
For the wider picture of boards and fonts, see lightsaber soundboards and lightsaber sound fonts.
How older swing triggers work
Before SmoothSwing, a saber treated a swing as an event. The board watches its motion sensor, and when rotation passes a set level it plays one swing file from the font. CFX still has this as a “swing threshold” setting, and Golden Harvest v4 calls the same idea legacy motion detection, with a setting for the minimum rotation speed that triggers a swing [2][3].
The result works, but you hear it. Every swing above the line gets a whoosh of the same length whether you moved slowly or fast, and small movements get nothing. Clash, stab and spin sounds still work this way on every board, because they are real events.
How SmoothSwing works
SmoothSwing treats swing as a continuous sound. The font carries pairs of hum variations, one lower and one higher. As you rotate the hilt, the board turns the main hum down and brings one file of the pair up. Keep turning and it crossfades to the other file, which gives the high then low (or low then high) pitch effect. When you stop, the main hum comes back [2].
The ProffieOS documentation describes two versions [1]:
- Version 1 loops the swingl and swingh files and imagines a rotating plane through the blade. Swing one way and you hear more swingl, swing the other way and you hear more swingh, each crossfaded against the hum. It never blends the two swing files directly.
- Version 2 uses numbered pairs. When you are moving slowly, it picks a new pair at random. During a swing it counts the degrees turned, crossfades from one file to the other at a random point, then crossfades back about half a turn later. The combined sound is then mixed with the hum by swing strength.
ProffieOS reads a small file called smoothsw.ini in the font folder to decide which version to use [1]. The idea of the whole design is that the sound follows the motion. Our lightsaber sound effects page compares this to how the film sound was made.
Which boards support SmoothSwing
| Board | SmoothSwing support | Pair file names | Fallback for older fonts |
|---|---|---|---|
| Proffieboard (ProffieOS) | Versions 1 and 2, chosen in smoothsw.ini [1] | swingl and swingh, numbered pairs in V2 [1] | Plays ordinary swing clips if no pair files exist [1] |
| CFX (Plecter Labs) | Own version “as described by Thexter” with tweaks, standard and hybrid modes [2] | lswing and hswing [2] | Detects pair files at boot, old fonts can be converted by adding pairs [2] |
| Golden Harvest v4 (Sabertec) | Smooth Swing engine with accent swings and accent spins [3] | Not named in the manual we read | Switches to legacy motion detection if pairs are missing [3] |
| Xenopixel | Listed as “smooth swing” on Xeno sabers [5] | Not documented in sources we found | Not documented |
Some details by board:
- Proffieboard. ProffieOS lists SmoothSwing V1 and V2 among its features [4]. Our Proffieboard guide covers the board itself.
- CFX. The manual says SmoothSwing works with both monophonic and polyphonic fonts, and that the settings live in each font’s own config file [2]. A community timeline describes CFX as the first mainstream board outside Proffie to ship SmoothSwing, around mid 2019 [6].
- Golden Harvest v4. Sabertec’s manual lists unlimited smooth swing pair sounds and accent sounds, and says fonts made for CFX SmoothSwing load without renaming [3].
- Xenopixel. Ultrasabers says all its Xeno sabers come with smooth swing [5]. A Xeno3 manual we read exposes swing sensitivity in the config file but does not describe the algorithm [7]. So we cannot tell you whether it follows Thexter’s design. The Xenopixel lightsaber page covers what Xeno boards can and cannot change.
Sound font requirements
A font gets SmoothSwing only if it ships the pair files your board looks for: swingl and swingh on Proffie, lswing and hswing on CFX [1][2]. The pairs are usually reworked copies of the main hum at different pitches, which is why Plecter says an older font can be converted by making a low and high pair from its hum [2].
A font without pairs still plays. It just uses ordinary swing clips. If you move fonts between boards, file names have to match the target board. The sound fonts guide covers formats and conversion tools.
Tuning at a high level
Both open documentation sets expose the same handful of ideas under different names. You rarely need to touch them, and font makers usually ship values that suit their font.
- How fast you must turn for full swing volume. CFX calls it smooth_sens, in degrees per second [2].
- How much the main hum drops during a swing. CFX uses smooth_dampen, and ProffieOS uses MaximumHumDucking, with a default of 75 percent according to the comments quoted on the ProffieOS forum [2][8].
- How wide the crossfades between the pair are. CFX uses smooth_width1 and smooth_width2, and ProffieOS uses Transition1Degrees and Transition2Degrees. The ProffieOS author gave defaults of 45 and 160 degrees on the forum [2][9].
- How eagerly the board picks a new pair. CFX uses smooth_physics, and ProffieOS V2 uses SwingStrengthThreshold [1][2].
- Accent swings on top. CFX has a hybrid mode that also plays regular swing clips on hard swings, and ProffieOS has an accent swing speed setting [2][8]. Golden Harvest v4 uses accent_swing_threshold [3].
If a font sounds thin or crackles after you change these, put the values back and check the troubleshooting guide for crackling and dropouts.
How to tell if a listing has real SmoothSwing
“Smooth swing” on a product page is a marketing phrase and nobody polices it. These checks help.
- Look for the board name. A listing that names Proffie, CFX, Golden Harvest or Xeno tells you which version you get. A listing that says only “smooth swing” and “motion control” tells you nothing.
- Watch a demo video with sound. With SmoothSwing, slow turns bend the hum and fast spins rise and fall. With trigger swings, you hear the same whoosh at each swing and silence on small moves.
- Ask the seller for a font folder listing. Pair files in the font are the clearest proof.
- Check whether you can load your own fonts. If you can, you can add SmoothSwing fonts later. The Xenopixel vs neopixel page compares how open each board family is.
Sources
- ProffieOS documentation, Sound font configuration, https://pod.hubbe.net/sound/sound-font-configuration.html (accessed 2026-11-18)
- Plecter Labs, Crystal Focus v10 (CFX) manual rev. 1.01, https://www.plecterlabs.com/Media/Doc/Crystal%20Focus%20v10%20rev1.01-GB.pdf (accessed 2026-11-18)
- Sabertec, Golden Harvest v4 manual, https://sabertec.net/wp-content/uploads/2024/11/Golden-Harvest-v4-Manual.pdf (accessed 2026-11-18)
- Fredrik Hubinette, ProffieOS, https://fredrik.hubbe.net/lightsaber/proffieos.html (accessed 2026-11-18)
- Ultrasabers, Premade Xenopixel sabers, https://ultrasabers.com/product-category/premade-xenopixel-sabers/ (accessed 2026-11-18)
- The Crucible, Timeline project, https://crucible.hubbe.net/t/timeline-project/4456 (accessed 2026-11-18)
- Damiensaber, XENO3.0 user manual (2024), https://cdn.shopify.com/s/files/1/0571/4454/1345/files/Damiensaber_XENO3.0_User_Manual_2024.pdf (accessed 2026-11-18)
- The Crucible, About smoothsw.ini, https://crucible.hubbe.net/t/about-smoothsw-ini/3549 (accessed 2026-11-18)
- The Crucible, Confirm smoothswing.ini file parameters, https://crucible.hubbe.net/t/confirm-smoothswing-ini-file-parameters/426 (accessed 2026-11-18)
FAQ
What is SmoothSwing on a lightsaber?
A method that blends pairs of hum files with the main hum as you rotate the hilt, so the swing sound follows your motion instead of playing a fixed clip [1][2].
Who invented SmoothSwing?
A hobbyist known as Thexter. ProffieOS and Plecter Labs both credit him for the algorithm [1][2].
What is the difference between SmoothSwing V1 and V2?
V1 loops one pair and crossfades by swing direction. V2 uses numbered pairs, picks pairs at random and crossfades by degrees turned [1].
Do all sound fonts support SmoothSwing?
No. The font needs swing pair files, named swingl and swingh on Proffie or lswing and hswing on CFX [1][2].
Does Xenopixel have real SmoothSwing?
Xeno sabers list smooth swing [5], but we found no public description of how it works, so we cannot compare it with Proffie or CFX.
Can I turn SmoothSwing off?
On CFX, smooth_mode 0 disables it for a SmoothSwing font [2]. On Proffie, removing the pair files makes the font use ordinary swings [1].
Editorial team
Writes for Saber Atlas. Every guide is checked against the maker's specs and dated, so you know how fresh it is.
Read next
Lightsaber Soundboards Explained: Proffie, Xenopixel, CFX, GHv4
A lightsaber soundboard is the control board in the hilt: it reads motion, plays sound from an SD card and drives the blade lights. The main families are Xenopixel (cheap, ready-made), Golden Harvest v4 (mid-range), CFX (Plecter, closed) and Proffieboard (open source, most flexible). Board prices run from about $45 to $85.
Lightsaber Sound Fonts: Formats, Rights and How to Load Them
A lightsaber sound font is a folder of audio files on the saber's SD card: hum, ignition, swing, clash, blaster block, lockup and more. Each board family expects its own folder layout and file names, so a font often needs renaming. Rights are unclear for fonts built from film audio.
Proffieboard Guide: Versions, ProffieOS, Sound Fonts and Where to Buy
Proffieboard is an open-source lightsaber controller designed by Fredrik Hubinette and run by the ProffieOS firmware. This guide covers what it does, the V1.5, V2.2 and V3.9 versions, how sound fonts and config files work, who it suits, how it compares with Xenopixel, CFX and Golden Harvest, and where it is sold.
Xenopixel Lightsaber: What It Is, Versions, Limits and What to Check
A Xenopixel lightsaber is a pixel blade saber run by a ready-made Xeno board, currently Xeno3.0 in the vendor listings we read. It offers a Bluetooth app, preset sound fonts and effects, and a low entry price, but it is closed source, so firmware, support and upgrades depend on the seller.
Lightsaber Sound Effects: What They Are, Where They Came From, How Sabers Play Them
Lightsaber sound effects are a short list of sounds: hum, ignition, retraction, swing, clash, blaster block and lockup. Ben Burtt made the film hum from idling projector motors and television buzz, then added motion with a moving microphone. Sabers replay these from sound fonts. This page explains them and hosts no audio files.
Xenopixel vs Neopixel: What the Difference Is and Which to Buy
Xenopixel is not a rival to neopixel. Neopixel is the blade type, a strip of individually addressable LEDs. Xenopixel is a ready-made board that drives that strip. The real choice is Xenopixel versus Proffieboard, Golden Harvest v4 or CFX. Xenopixel is cheaper and simpler, Proffie is more customisable.
Lightsaber Troubleshooting and Repair: Documented Fixes
Most lightsaber faults trace back to a low or badly seated battery, a bad or corrupt SD card, or a loose connector. This page collects the troubleshooting steps that board makers and vendors document for no power, no sound, flicker, charging, SD card and stuck screw problems, with a safety note on batteries and opening hilts.